$9.95
The Quarry Floors set contains 9 different floor tiles of different sizes. This pack is part of the Quarry range and is designed to be used with Quarry Walls and Quarry Pools and Streams sets. This set is compatible with all other OpenLOCK products.
Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
The solid rock floor of the quarry tunnels bears the scuff marks from hard leather boots of miners seeking their fortune.
Notes for Quarry Floors:
| Recommended Printer | FDM or resin printer |
|---|---|
| Terrain Tinker | Available |
| Infill | 100% for resin printing, 10% |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more
Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more
You must be logged in to post a question.
luizhdcosta (verified owner) –
Why does the S piece does not have a grid separation similar to the E tile in this set?
Sam Campbell (verified owner) –
When we designed this the grid separation wasn’t as important a factor as the texture on the floor for this set.
Matt Barker –
Good point, we will update that
aethereus.aeterna (verified owner) –
Could you add a V floor tile for this set?
Mike (Printable Scenery) (verified owner) –
When we look at updating this set we will add a V floor
Dag-Inge Enger (verified owner) –
Is it possible to get some quarry floor “end-caps” in the style of the ruined stone floors in the Clorhaven set? So you can have drop down to a lower level and not see the openlock connectors but the “end-caps” instead.
Thinking in the lines of the files: E-A-TRP-Ruin-Floors.v4.0, E-B-TRP-Ruin-Floors.v4.0, E-C-TRP-Ruin-Floors.v4.0
Matt Barker –
I’m not sure what you mean: do you mean end caps for the quarry floors?
Dag-Inge Enger (verified owner) –
Sort of yes. But maybe some variety and not just a flat surface end cap.
https://www.printablescenery.com/product/clorehaven-ruined-floors/
Was thinking how these pieces look and they would make a good jagged edgecap if they had the quarry floor texture.
The A IA, and BA files just cut off to have flat surface at the moment at one side at the moment.
Matt Barker –
OK, so IA (inch) A(2 inches) and BA end caps that flow down to ground level ? This will be a great update… on it!