Port lifting Bridge

Name: Port lifting Bridge
Brand: Age of Sigmar
Availability: InStock

$14.95

Any sales taxes will be calculated in the checkout.

The Port Lifting Bridge is an FDM 3D Printer Model that features a working bridge. The axles are held in place with 1.75mm filament and you will need string to attach the crane arm to the bridge. It also features ramps to take the bridge to the ground. Also included is an OpenLOCK wall version.

This model is part of the Cities of Ramshackle & Ruin Campaign

This product is part of the Ports of Ramshackle Bundle

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

As dawn broke, a band of fierce warriors approached the port, ready to cross the bridge and face their enemies. But, to their dismay, the bridge was raised, wound up high by a clever hand. Impatient, they leaped into the water, armor weighing them down. None reached the other side.

Updates:

On 20 November 2024 (version 1.1) The Bridge platform is now available in two parts that can be printed and glued together. Bridges A and B have also been adjusted to allow for easier lifting and placement of the platform.

Notes for Port Lifting Bridge 3D print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small Printer reference sheet included in the zip file.
Some Small Printer cuts require support.
Product measurements can be found in the image gallery.
First Published version 1.3

Port Lifting Bridge

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Support needed for small printer cuts
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

19 Comments