Oxen Enclosure – Hagglethorn Hollow

Name: Oxen Enclosure - Hagglethorn Hollow
Brand: Age of Sigmar
Availability: InStock

$9.95

Any sales taxes will be calculated in the checkout.

The Oxen Enclosure is a piece of 3D printable scatter terrain from the Hagglethorn Hollow series. It fits in perfectly with the Pig Pen, Hens Tower and Common Gardens to create a farmyard scene for tabletop wargames and Role-Playing Games.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The few animals that could be brought over the treacherous mountain path that secretly lead into the hollow are kept and breed in manageable pens built from such wood as could be spared. Seen (and smelt) between the alleys and the front yards of Hagglethorn houses, the oxen provide the muscle around town, moving heavy stones and produce from one place to another.

The Oxen Enclosure comes with the following printing options:

Main Folder- A folder containing the model cut into pieces for most conventional FDM 3D printers with a print bed size of 200mm x 200mm x 200mm
FDM With Supports- A folder containing pre-supported pieces to allow printing without overhangs
Resin Pre-Supports- Small printer cuts with pre-generated supports for resin printing.
Small Printer Cuts- A further cut version of the model for smaller printers with a print bed size of 155mm x 120mm x 120mm

Updates:

31 October 2024 (version 1.4) An empty enclosure has been added.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small printer reference sheet included in the zip file.
Product measurements can be found in the image gallery.
Copyright Printable Scenery under license from Tabletop Troubadour Games
First Published version 1.3

Oxen Enclosure STL

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	pre-support version included in download., requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Painting Hagglethorn: Garden Fences

Posted on August 20, 2021July 24, 2025 by Mike Los

The Garden Fences from Hagglethorn Hollow add a lot of character to your games and importantly for your troops, they add cover! We’ve used this method on the Common Gardens as well as the fences but it would also be useful for any other wicker or stick surfaces you might come across. Painting these is… Read more

Comments

Frozzn (verified owner) – November 6, 2021

In the downloaded file, I don’t see you can print out just the Oxen enclosure without the other smaller bits (Oxen, hay-bale etc). I was hoping to do the small parts in resin and the main part in PLA. Is it possible to update this?
- Mike (Printable Scenery) (verified owner) – November 6, 2021
  
  HI Frozzn,
  
  Thanks for your suggestion, I’ll add it to our list of model updates and see what we can do
Contrasting_Hobby (verified owner) – February 5, 2022

As mentioned already,the ‘EMPTY’ ‘Oxen enclosure base’ isn’t included in the files
There are resin supported miniatures (Oxen/hay bales) that can be printed seperately to this, so I can only assume it was meant to be there like the pig pen
Can this be updated please
- Mike (Printable Scenery) (verified owner) – February 8, 2022
  
  Ill add your suggestion to the list of model updates to work on. Thanks for your feedback
Eric.Lofgren (verified owner) – August 20, 2024

Putting in another request for an empty oxen enclosure.
- Joanne Boorer – August 20, 2024
  
  Thanks for your suggestion.
  I will add this to our model update list.
dreadknot69 (verified owner) – October 21, 2024

Putting in my request for and empty enclosure as well. I asked for this during the campaign and I see others have as well.
- Joanne Boorer – October 22, 2024
  
  Hi
  
  Thanks for the feedback.
  This is currently with a modeler to process.
dreadknot69 (verified owner) – October 31, 2024

You guys have earned a customer for life with that kind of customer service. It’s been a couple years and you could’ve easily let it go but you addressed it. No real benefit to you, just to us. That’s triple-A customer service right there. Thank you.
- Joanne Boorer (verified owner) – November 1, 2024
  
  Hi
  Thanks for this great feedback.
  We appreciate it.