Name: Navigators' Guild
Brand: Age of Sigmar
Availability: InStock

Navigators’ Guild

$14.95

Any sales taxes will be calculated in the checkout.

The Navigators’ Guild is a medieval styled building that can be used for a fantasy or historical setting and prints without supports as separate levels. An option with smaller parts for small printers is also included.

This product is part of the Port Winterdale

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

For many years, this magnificent building has housed not only the training school for the finest ships’ navigators, but also the meeting place for the more progressive alchemists. The sheer pace of scientific advance within the guild has long been a cause for concern for the religious temples and the Mages’ Guild.

Updates:

19 November 2019 (version 1.1) Solid options added.

Notes for Navigators’ Guild:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Reference sheet for medium printers

Reference sheet for small printers

Reference Sheet for Solid

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Supports	requires supports for resin printing, Prints without Supports
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Sakura.j.lim (verified owner) – September 5, 2018

i wanted to confirm that this is 28mm scaled as i just printed up lvl 1 pt 2 and it looks a fair bit smaller than all other 28mm scale buildings i have done from you guys. i have not printed the rest yet in case this was incorrect.
- Sam Campbell (verified owner) – September 5, 2018
  
  This is scaled for 28mm and is a smaller building than the others, the level heights are the same as the other buildings.
Christian Olesen (verified owner) – January 9, 2019

Question: How do you mount the astrolabia to the tower. Is it just by eye and glue or do it have specific grooves that im not aware of?

Btw, its hella cool, just printed it and it looks awesome.
- Matt Barker – January 9, 2019
  
  You can glue the astrolabia by eye. We did not want to make grooves for the alignment because we wanted the Astrolabia to be optional
timlaugh – January 24, 2019

For part NavigatorsGuild-Tower-v1.0.stl , does it require any support for printing the the top floor ?
- Matt Barker – January 24, 2019
  
  No, it should be fine. however, if you worried that your printer wont handle overhangs then you can switch ‘supports touching buildplate’ to on
Mark Smith – October 16, 2023

Are the different rooms separated by doors? I need a lighthouse that has a building with at least two separate rooms in the ground building and I think this will be perfect.
- Jo Boorer (verified owner) – October 16, 2023
  
  There is not a door between the two rooms on Level one of this model