Name: HEX Castle Wall Steps
Brand: A Song of Ice & Fire
Availability: InStock

Description

As the patrolling guard neared the top of the steps, he saw it—a flickering speck in the distance that could only be a torch. With a whistle, he called up his comrades to see. Finally, Ser Albion had returned from his quest. As they all stood there atop the steps on the wall, their cheering stopped as, one by one, hundreds more torches flickered to life. The guard raced back down the steps to wake the captain. They were under attack.

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here. Check out this article here for tips on printing Throne & Ash models.

Update:

4 June 2025 (version 1.2) An infill block has been added for those who wish to extend their Steps uphill.

Notes for HEX Castle Wall Steps 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Small Printer References are included in the zip file.

Product measurements can be found in the image gallery.

First Published version 1.1

Additional information

Recommended Printer

FDM or resin printer

Infill

10% for FDM printing, 100% for resin printing

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Scale

32mm Heroic & OpenLOCK

Supports

requires supports for resin printing, FDM Prints without support

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

Throne & Ash components reference

Posted on August 8, 2025August 13, 2025 by Sloane Dougherty

Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more

13 Comments

Building 3D printed scatter terrain for wargames

Posted on July 6, 2025July 23, 2025 by Sloane Dougherty

With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more

Tips for 3D printing Throne & Ash models

Posted on June 6, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025July 17, 2025 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

12 Comments

How to paint castle bricks

Posted on April 29, 2025July 23, 2025 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

10 Comments

How to build a square castle

Posted on April 28, 2025July 17, 2025 by Sloane Dougherty

In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more

12 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025July 17, 2025 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

14 Comments

Comments

johnjackwalsh (verified owner) – May 11, 2025

I’m noticing an issue with HEX-180-Castle-Steps-Down-v1.0, for some reason this file won’t slice. I’ve tried downloading multiple times, this issue seems isolated to this single file. The software I am using is Bambu Studio: the program just halts at about 25% of slicing progress and hangs.

Joanne Boorer (verified owner) – May 12, 2025

Hi John. I tried to recreate this error by downloading and then slice in using our Bambu slicer and it works fine. Are you using the basic setting that Bambu provides?

Bill Robertson (verified owner) – June 15, 2025

Fabulous Campaign!
I have many sections of walls now, but no steps to get up to the ramparts. The [Hex Castle Wall Steps] connect to the END of a wall but can’t be placed beside it – I’m looking for (preferably stone) steps that can be placed on the defensive side of the walls at intervals. How do soldiers get up to the [Oval Bastions] or [Castle Gate] or [Wall Turret] etc.?

Joanne Boorer (verified owner) – June 16, 2025

Hi. Thanks for reaching out. This option will be included in with the South gate when it is released.

johnjackwalsh (verified owner) – May 11, 2025

I’m noticing an issue with HEX-180-Castle-Steps-Down-v1.0, for some reason this file won’t slice. I’ve tried downloading multiple times, this issue seems isolated to this single file. The software I am using is Bambu Studio: the program just halts at about 25% of slicing progress and hangs.
- Joanne Boorer (verified owner) – May 12, 2025
  
  Hi John. I tried to recreate this error by downloading and then slice in using our Bambu slicer and it works fine. Are you using the basic setting that Bambu provides?
Bill Robertson (verified owner) – June 15, 2025

Fabulous Campaign!
I have many sections of walls now, but no steps to get up to the ramparts. The [Hex Castle Wall Steps] connect to the END of a wall but can’t be placed beside it – I’m looking for (preferably stone) steps that can be placed on the defensive side of the walls at intervals. How do soldiers get up to the [Oval Bastions] or [Castle Gate] or [Wall Turret] etc.?
- Joanne Boorer (verified owner) – June 16, 2025
  
  Hi. Thanks for reaching out. This option will be included in with the South gate when it is released.