Gothic Gatehouse

$24.95

Any sales taxes will be calculated in the checkout.

A colossal gatehouse denies entrance to a kingdom of darkness.
This massive gatehouse combines two Gothic Round Towers with a multi-story building.
Compatible with all other Darkness models, as well as other SystemHEX models from Throne & Ash.
Comes with the gatehouse building, the towers, doors, arrowslit windows, buttresses, and adaptors for connecting to SystemHEX walls.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

All efforts to open the Gothic Gatehouse are rebuffed. The mighty oak doors of ancient design are held fast by mechanisms of profane design. But that doesn’t stop the visions coming to you in the darkest hours of the night. Visions of approaching the gatehouse, the doors opening, and a darkness darker than night inviting you inside its kingdom.

Top down render of the Gothic Gate House model in the SystemHEX template

Notes for Gothic Gatehouse 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Recommend using the flat wall plugs underneath the buttresses.
Product measurements can be found in the image gallery.
First Published version 1.1

Gothic Gatehouse Reference Gatehouse Round Tower Reference Adaptors Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 15%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How to Paint the 3D Printed Gothic Walls from Darkness & Desolation

Posted on July 28, 2026July 28, 2026 by Sloane Dougherty

In this article, we’ll show you how to paint the 3D printed Gothic Walls from our Darkness & Desolation campaign. We’ll cover the paints needed, the techniques we used, and any tips along the way to get your Gothic Walls ready for the tabletop. The methods in this guide can be used on all of… Read more

Comments

joshua.rouleau (verified owner) – August 6, 2026

Can we have a version where the round towers attach at a 30 degree rotation from what they do now (effectively allowing wall, tower, gate, tower, wall all in a straight line)? While this would require a lvl 1 tower section with a couple of the connection points removed (or the gate adapted, I’ve mocked up adding a small buttress in my slicer), it would allow for plug opening in the towers that is in the center, for use either as an arch, window / arrow slit, or door.
joshua.rouleau (verified owner) – August 6, 2026

Playing around some more, I’ve realized doing the above messes with the tessellation. However, as it is making a simple hex shape castle (with 1x wall between each tower and the gate taking the place of a wall + adaptors) not possible. I think making the gate wider (looks like 125% across) so it occupies the same space as a wall + adaptors which the towers then plug into would be better than the current way it tessellates, unless there is going to be something else that occupies the same hex setup to use on the opposite side of the castle from the gate.