Cart (0)

Product Categories+

Cobblestone Way


Any sales taxes will be calculated in the checkout.

Cobblestone Way is a large, three-story stone and wood building. Pictured are two prints of it, utilising the connector building between to create an alleyway. Each building consists of two separate abodes common to crowded medieval cities. Each floor has interior details with opening doors and fireplaces.

This product is part of the Complete Country. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Of simple construction and cheaper materials, the many towering buildings that form the street of cobblestone way are purpose build to house the ever-growing populace of his Majesties’ prospering city.  


  • 3 March 2023 (version 1.1) Now includes Level 1 with a back wall.

Notes for the Cobblestone Way STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Note the second building is a mirrored version of the first. Instructions to mirror models.
  • Small printer reference included in the zip file
  • Product measurements can be found in the image gallery.
  • First Published version 1.0

Cobblestone Way Building STL

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


requires supports for resin printing, Prints without Supports

3 questions for Cobblestone Way

  1. derk442 (verified owner)

    As a suggestion, I think it would be a nice addition to have a 45 / 90 etc degree connector building/piece to give another option other than setting up the buildings in a straight line. Also a middle building so you could have 3+ buildings connected.

    • Jo Boorer (verified owner)

      Thanks for your suggestion. I will add it to our updates list.

  2. Henrik Andersen (verified owner)

    The lvl 1 part of Cobblestone Way hause is not completely flat on the bottom.
    I discovered this as I couldnt understand why the print failed so badly.

    Best Henrik

  3. Henrik Andersen (verified owner)

    Now I went through the files again lvl. 3 is also not completely level at the bottom, not as much as lvl 1 but still enough to cause hiccups.

    Easily fixable in the slicer, if you notice it 🙂

    • Jo Boorer (verified owner)

      I have pulled both parts you mentioned into cura and sliced them and looked at layer 1, which shows them sitting flat on the build plate.
      Can you please send a screenshot of what you are seeing to [email protected]

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey