My Account Cart (0)

Download
Cart $0.00

Home>All Previous Campaigns>Cities of Ramshackle and Ruin>Cities of Ramshackle>City Inn Expansion

City Inn Expansion

Name: City Inn Expansion
Brand: Age of Sigmar
Availability: InStock

$29.95

Any sales taxes will be calculated in the checkout.

The City Inn Expansion adds detail and character to an already impressive centrepiece. The expanded roof includes interior detail and the wider entrance allows for more interaction on the ground floor.

This model is part of the Cities of Ramshackle & Ruin Campaign

This product is part of the Ramshackle & Ruin: Cities Bundle

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

As the renown of the growing shipping port rises, so too must its buildings expand to accommodate the rising influx of merchants, soldiers, and sailors who seek their fortunes there. The inn is as hard-pressed as any, adding rooms and sheltered stabling as best as the original structure can support.

Updates:

01 July 2025 (version 3.2): Extra locking pin holes were added to the base of Level 3 so that it would fit correctly onto Level 2 City Manor, achieving swappable option X.

Notes for City Inn Expansion STL:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Photos shown in the gallery are the Original City Inn lower levels with the City Inn Expansion Roof.
Even though this model is compatible with the City Inn, each floor differs from the City Inn. (Level 1 now has double doors and a window here the main door was. Lv2 has a hatchway, Shorter balcony, and back window removed to allow for the chimney in this placement. Lv3 has a hatchway, and the back door has been removed.
A small printer reference sheet is included in the zip file.
Important: This product is scaled to 32mm. To print it at 28mm to match the other 28mm terrain, scale it to 90%.
Product measurements can be found in the image gallery.
First Published version 3.1

City Inn Expansion 3d print

Swappable Options

To create the building as shown in images above you will need the following levels: The red areas show the levels from other models.

Swappable option V

Level 1 City Inn Expansion side 1 (City-Inn-Expansion-Lv1) Side 2 City Inn (City-Manor-Lv1)
Level 2 City Inn Expansion side 1 (City-Inn-Expansion-Lv2) Side 2 City Inn (City-Inn-Lv2)
Level 3 City Inn Expansion side 1 (City-Inn-Expansion-lv3) Side 2 City Inn (City-Inn-Lv3)
Level 4 City Inn (City-Inn-Lv4-B) Side 2 (City-Inn-Lv4-A)
Level 5 City Inn (City-Inn-Roof and Roof Spikes)

Swappable option W

Level 1 City Inn Expansion side 1 (City-Inn-Expansion-Lv1) Side 2 City Inn (City-Manor-Lv1)
Level 2 City Inn Expansion side 1 (City-Inn-Expansion-Lv2) Side 2 City Inn (City-Inn-Lv2)
Level 3 City Inn Expansion side 1 (City-Inn-Expansion-lv3) Side 2 City Inn (City-Inn-Lv3)
Level 4 City Inn Expansion (City-Inn-Lv4-B) Side 2 (City-Inn-Lv4-A)
Level 5 City Inn Expansion (City-Inn-Roof and Roof Spikes)

Ramshackle swappable options

Swappable option X

Level 1 City Manor side 1 (City-Manor-Lv1) Side 2 City Inn Expansion (City-Inn-Expansion-Lv1)
Level 2 City Manor side 1 (City-Manor-Lv2) Side 2 City Inn Expansion (City-Inn-Expansion-Lv2)
Level 3 City Inn Expansion side 1 (City-Inn-Expansion-lv3) Side 2(City-Inn-Expansion-lv3-Mirror)
Level 4 City Inn Expansion (City-Inn-Lv4-B) Side 2 (City-Inn-Lv4-A)
Level 5 City Inn Expansion (City-Inn-Expansion-Roof and Roof Spikes)

Swappable option Y

Level 1 City Inn Expansion (City-Inn-Expansion-Lv1)
Level 2 City Manor (City-Manor-Lv2)
Level 3 City Manor (City-Manor-lv3)
Level 4 City Manor (City-Manor-Roof)

Ramshackle swappable options

Swappable option Z

Level 1 City Inn Expansion (City-Inn-Expansion-Lv1)
Level 2 City Blacksmith (City-Blacksmith-Roof)

Swappable option ZA

Level 1 City Inn Expansion (City-Inn-Expansion-Lv1)
Level 2 City Inn Expansion (City-Inn-Expansion-Lv2)
Level 3 City Tenement (City-Tenement-lv3)
Level 4 City Tenement (City-Tenement-Roof)
Level 5 City Tenement (City-Tenement-Roof-Cap)

To view other swappable building layouts click here.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, Pre-Supported FDM supports provided, Prints without Supports

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

17 Comments

Comments

Giraffe (verified owner) – March 28, 2025

How tall is this model printed?
- Joanne Boorer (verified owner) – March 28, 2025
  
  The City Inn Expansion building is 354mm tall