Name: Caribbean Shack
Brand: Age of Sigmar
Availability: InStock

Description

Built out of whatever could be found at the time, this shack has an unreliable rickety feel to it.

Updates:

19 February 2019 – 1.1 Locking pins and filament door connection have been added.

Notes for Caribbean Shack:

The footprint of the Caribbean Shack is 75 x 75.
Consider scaling this model before printing. For skirmish games and role-playing games, it may be advisable to scale up by 1.2(20%). This will allow 25mm figures to be placed on the balcony.
Right-click on the image below and “Save As” to download the reference sheet for this pack.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

izzymad – May 15, 2017

Hi,

I’ve just noticed on a few of the description sheet with all the view ps of the item. There are two symbols in the lower corners. The tick is self explanatory. But the right hand corner is different to others I’ve seen. So what does this one mean, wavy lines, and what do all the other mean.

Thnaks
- Matt Barker – May 15, 2017
  
  That’s the Windows icon for K-Studio. We make a screen grab of the directory as a reference sheet for those that don’t have K-Studio installed.
  
  The others are the icons for Meshmixer.
  
  This is the link on how to install K-Studio https://www.youtube.com/watch?v=sIPmkeb6kjE
grancapitan01 (verified owner) – December 24, 2017

Hi, new to printing and am having trouble with my PRUSA printing this model. When the print gets to the thatch work the printer eventually stops extruding and the filament gets stuck in the hotend (not nozzle block) that I will manually have to pull out. I can print regular buildings just fine but the thatch throws it.
- Matt Barker – June 25, 2020
  
  The thatch has a lot of detail, so the printer needs to start and stop extruding a lot. this can cause a blockage. One solution would be to rotate the model 90 degrees so that it prints the straw thatch detail in the ‘longways’ direction. You can check this in your slicer before printing