Name: Cargo Piles
Brand: Blood & Plunder
Availability: InStock

Description

The pirates swept down from their cursed galleon on old rope and chain, brandishing rusted swords and pok-marked pistols. The Winterdale Port Guards took cover behind what few crates and cargo piles were left on the docks, loading their own rifles and fixing bayonets. One pirate blew a shot into the cargo pile in front of a couple guards, exploding the crates in a shower of red. Seeing his friend covered in red, the guard charged out, shouting and firing his rifle, but slipped on the pile of crushed tomatoes from the crate.

Notes for Cargo Piles:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

shepherddavid (verified owner) – March 9, 2020

I am hoving trouble printing the box and rope file on my Anet N4 resin printer. I had just printed an old file and then on the Cargo file nothing?? Any sugestions ??
Dave, thanks, file sliced fine but no print.
- Nicholas Jebson – March 10, 2020
  
  Hey Dave,
  If you Re-Download and re-slice the file, changing its rotation on the build plate that could help. sometimes there can be a problem between the slicer and the printer that can be fixed just by changing the orientation of the model.
shepherddavid (verified owner) – March 11, 2020

thanks I will try that — Dave
Waleed Abbasi (verified owner) – March 29, 2020

Is there anyway you could release individual pieces, such as a single barrel, or a single cargo crate?
- Sam Campbell (verified owner) – March 30, 2020
  
  These are available individually in https://www.printablescenery.com/product/frigate-28mm-pirate-ship/ and we do have similar ones available in https://www.printablescenery.com/product/clorehaven-barricades/
Walter Torres – December 2, 2023

I have a need for just the rope coil.

Do you have that?
- Jo Boorer – December 5, 2023
  
  We don’t have the rope as a separate item.