$7.95
These five different bone piles can be scaled and printed to fit a wide variety of scenarios. You could even make yourself a bone-scattered swamp or use them to brighten up that old Lich’s crypt. They are also frequent sights in monster’s dens, necromancer’s lairs or old battlefields.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Scattered on the floor you find the remains of the last adventurer who chanced upon the monster’s lair. Will you be more successful, or will the pile continue to grow?
Updates:
Notes Bone Piles:
| Recommended Printer | FDM or resin printer |
|---|---|
| Terrain Tinker | Available |
| File Type | STL files in ZIP folder |
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Print Volume | 100mm x 100mm x 100mm print build volume required |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
You must be logged in to post a question.
seitoheiwa –
How many bottom/top layers do you suggest for this print?
Greetings
Michael
Sam Campbell –
I’d recommend printing this at 100% infill as it will take a slightly more amount of filament.