Bell Tower (Expansion)

Name: Bell Tower (Expansion)
Brand: A Song of Ice & Fire
Availability: InStock

$4.95

Any sales taxes will be calculated in the checkout.

The Bell Tower expansion is made to be used with the Norman Church.

The Bell Tower provides an alternate steeple top for the Norman Church, with open access for the large bell that sits inside. Using a spare piece of filament as an axle, the bell can swivel in its mount, mimicking the real thing.

This product is part of the Complete Country

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Whether heralding the afternoon sun or his lordship leaving the keep, the township’s bell tower chimes are familiar and comforting to those who live near enough to hear them.

Updates:

24 April 2025 (version 1.2) Locking pin Cavities adjust to fit new locking pins on the Norman Church Tower.

Notes for the Bell Tower STL:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small printer reference sheet included in the zip file.
Product measurements can be found in the image gallery.
First Published version 1.1

3d Printed Bell Tower

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How to paint Medieval Textures

Posted on November 3, 2022July 24, 2025 by Mike Los

In a previous post we covered how to paint the stone walls from the Country and King buildings. This article shows you how to paint medieval textures used on the terrain. In particular, the wood, roof tiles, wattle & daub, and hay. Wood & Roof Tiles After undercoating, basecoat the Wood with Oak Brown and… Read more

2 Comments

How to paint realistic Stone Walls

Posted on August 11, 2022July 24, 2025 by Mike Los

In this article, we’re going to show you how to paint the realistic looking stone walls from Country and King, and its easier to achieve than you might think. After doing plenty of research, and trial & error, we’ve come up with an effective method to recreate the pale stone look of medieval Europe. You’ll… Read more

24 Comments

Comments

Zagor (verified owner) – June 18, 2025

The Bell Tower fits perfectly with the Norman Church Tower Lv2. But if I want to fit the Bell Tower with the Norman Church Tower Lv1, the studs don’t fit together properly!
- Joanne Boorer (verified owner) – June 18, 2025
  
  The Bell Tower is not meant to fit on Level 1 of the Norman Church. It does look odd having the Bell Tower at that height. You can however achieve this by removing the locking pins and using some putty.