Name: Ruined Banquet Hall
Brand: A Song of Ice & Fire
Availability: InStock

Ruined Banquet Hall

$19.95

Any sales taxes will be calculated in the checkout.

A large, ruined, multi-level building with playable interiors.
Is a wall section that slots straight into HEX Castle walls
Occupies the same footprint as a 180-degree straight wall section.
This model is part of the Campaign for Throne and Ash.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The invaders stormed through the Ruined Banquet Hall, brandishing their weapons and flaming torches. But they were instead greeted by a quiet hall littered with the dead, and a foul stench in the air. The second thing they noticed was the bounty of food on the table, and not wanting to look a gift horse in the mouth, they immediately tucked in. They joined the bodies on the floor not long after.

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here, and painting Wattle & Daub and Roof tiles is here. Check out this article here for tips on printing Throne & Ash models.

See below how the Ruined Banquet Hall tessellates with the Castle Walls.

Top down graphic diagram of the Banquet Hall in SystemHEX

Notes for 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Product measurements can be found in the image gallery.

First Published version 1.1

Additional information

Recommended Printer

FDM or resin printer

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Scale

32mm Heroic & OpenLOCK

Supports

requires supports for resin printing, FDM Prints without support

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

Building a 3D Printed Island Castle Diorama

Posted on February 17, 2026February 17, 2026 by Sloane Dougherty

In this article, we’re going to cover building an Island Diorama for a 3D printed castle using our Throne & Ash models. We’ll show how to build the castle board, paint it, and finish it ready for setting up your castle encounter or wargame. We built our castle on a 6×4-foot table, but you can… Read more

SystemHEX Video Guides

Posted on November 28, 2025November 28, 2025 by Sloane Dougherty

As the catalogue of Throne & Ash models expands, so do the possibilities of things you can build with SystemHEX. As we release new models and complete the range, we’ll produce videos that explain the models and what you can do with them. Below is a playlist of videos we’ve produced for SystemHEX using the… Read more

Throne & Ash components reference

Posted on August 8, 2025November 25, 2025 by Sloane Dougherty

Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more

16 Comments

Building 3D printed scatter terrain for wargames

Posted on July 6, 2025October 23, 2025 by Sloane Dougherty

With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more

How to assemble Throne & Ash 3D printed doors

Posted on June 13, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll show you how to assemble your 3D printed Throne & Ash doors in a few straightforward steps. We’ll show you how to clean up the parts, fit them together, and check that it’s working. You’ll have functional doors throughout your castle in no time, perfect for when players need to sneak… Read more

5 Comments

Tips for 3D printing Throne & Ash models

Posted on June 6, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more

5 Comments

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025November 25, 2025 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

16 Comments

How to paint castle bricks

Posted on April 29, 2025July 23, 2025 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

12 Comments

How to build a square castle

Posted on April 28, 2025July 17, 2025 by Sloane Dougherty

In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more

18 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025October 23, 2025 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

14 Comments