Bamboo Arena

Name: Bamboo Arena
Brand: Age of Sigmar
Availability: InStock

$11.95

Any sales taxes will be calculated in the checkout.

The Bamboo Arena is a large, FDM 3D printer model perfect for one-on-one arena battles. The Bamboo stands require some gluing and can be removed keeping the ancient ruins intact.

This product is part of the Gloaming Wilderness

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The Fey folk of the Gloaming have reclaimed many of mankind’s stone cities, reworking the ruins to fit their needs. This bamboo arena serves as a training ground for those wishing to fight back those invading the Gloaming, often using the captured foe as fodder in trials by combat.

Notes for the Bamboo Arena STL:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small Printer Reference is included in the zip file.
Bamboo Arena support structures should be printed with raft/brim.
Product measurements can be found in the image gallery.
First Published version 1.2

Whole Version Reference

Whole version Bamboo Arena 3d printed

Cut version

Bamboo Arena STL

Additional information

Recommended Printer	FDM printer only
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	Prints without Supports, Requires supports on some files
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

The Gloaming Swamps 3D Printer Model Painting Guides

Posted on November 30, 2023July 8, 2025 by Mike Los

All of the 3D printer models from the Gloaming Swamps and Wilderness Kickstarter are now available to download and print. Throughout the campaign, we have been creating painting panels for each 3D printer model as it became available. We are pleased to present them all to you here in one place, along with a few… Read more

2 Comments

1 question for Bamboo Arena

Jeremy (verified owner) – July 23, 2025

Beautiful model. I can see it being the centrepiece for many a great battle.
Curious, what are the little holes for placed on top of some of the pillars and on the base. Are there other parts that might slot in there from another set?
- Matt Barker – July 25, 2025
  
  Hi Jeremy, we added those to you can slot in other thinks like spikes or https://www.printablescenery.com/product/impaled-skeletons/