$9.95
The Arcanist’s Stone Walls is a set of OpenLOCK scatter walls that can be used in a fantasy or historical setting for tabletop wargaming or roleplaying games. This is designed to match the Arcanist’s Tower, Arcanist’s Stone Canal Walls and Arcanist’s Stone Bridge.
A piece of wire or filament can be used as a hinge pin for the gates.
Download the Clorehaven Trial Pack for free to get the latest version of the OpenLOCK clip.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
The Arcanist’s grounds sported large stone walls mostly for decoration and spikes to ward off the fauna of the fey.
Notes:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 10% for FDM printing, 100% for resin printing |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
In this video we demonstrate some effective techniques and tips you can use when assembling modular ruins using Murder Row. The same technique will apply for many of the other Shadowfey Ruins. Remember to take care when using superglue and other hazardous materials.
The dilapidated and haunted Shadowfey Ruins provide an excellent setting for horror themed encounters and games in ruined cities. This guide will help you achieve that look with a minimum of fuss so you can get gaming! This guide uses the Squatter Townhouse as an example but it is the same method we used for… Read more
Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more
You must be logged in to post a question.
astromedia.only (verified owner) –
I hope I did not missed this information somewhere but is it possible to print the gate door without supports somehow? Or what is recomended setup for that? Thanks.
Mike (Printable Scenery) –
It should print fine without supports. If it does require it we typically provide a pre-supported version
magicmagpie (verified owner) –
I’m a bit confused as to how to use Column I. It looks like it is supposed to take 4 OpenLOCK clips to join two sections of wall together. However, the two slots in the column are not deep enough to take a clip from each side. The first clip you put in blocks the placement of another clip from the other side. Any ideas here?
Joanne Boorer (verified owner) –
The I column is designed like this so you can put one OpenLOCK clip facing one way at the top and the other at the bottom facing the opposite direction.