Description

In the madness that is a gunfight on an industrial walkway, bullets and shrapnel harmlessly ricochet off the sturdy blast shields.

Updates:

On 28 November 2017 (version 1.1), A-Ladder-Scifi-Long-v1.1 has been set to zero origin, which could confuse some slicers.

Notes for Industrial Walkway, Ladders, and Blast Shields:

To make a complete walkway, you will need an OpenLOCK floor pack
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Supports	requires supports for resin printing, Prints without Supports
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Sci-Fi Gothic Assembly Guides

Posted on May 26, 2020July 23, 2025 by Nicholas Jebson

Below you will find instructions for assembling an awesome tables worth of terrain using the Sci-Fi Gothic and Daemon terrain sets, perfect for Warhammer 40K and future dystopic wargames. If you have print fails during the process of creating the ruins do not worry, they are ruins! Eagle eyed people will notice that there are… Read more

3 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

8 questions for Industrial Walkway, Ladders, and Blast Shields

tikigod1080 (verified owner) – November 22, 2017

Does everything just sit on top of the bridge supports? The bridge supports have bumps on top to keep things from sliding but that doesn’t seem very secure when compared to all of the pieces that lock together. It seems like it would be difficult to set up or move if they don’t actually attach.
- Matt Barker – November 22, 2017
  
  Yes, they just sit on top of the Supports. One option is to glue an E tile to the top of the Bridge Support. That way you can have sturdy bridges that are fully modular.
wingsofchronus (verified owner) – December 18, 2017

Hi. Any chance you could make some short supports and ladders at 3″ in height and the long ladders and tall supports 6″ in height? Providing these would help unify the heights when playing with other scenery with these dimensions (i.e. each level is 3″ tall). Thanks!
- Matt Barker – December 18, 2017
  
  Hi, yes we could do that no problem. Is the total height your looking for = 3″ and 6″ including the platform?
J.p. Brichta (verified owner) – December 30, 2017

Hi, can you explain how piece EH is supposed to connect with other OpenLock bits? The connector is right at the bottom and the pieces don’t match up properly.
- Matt Barker – December 30, 2017
  
  They are designed to work with OpenLOCK 2″ face like the E tile. They can be used as the sides to a bridge or raised platform. They are supposed to look like they sitting up off the ground. The inside partt of the blast wall will look good with the industrial floors.
jasharen (verified owner) – January 8, 2018

In the picture there are corner pieces to connect with G-railing, but in the actual package this piece is missing. Is that part of another package?
- Matt Barker – January 15, 2018
  
  You will also need the Sci-Fi floors if you want to make the Walkways
  : https://www.printablescenery.com/product/gothic-sci-fi-floors
tom.crea133 (verified owner) – May 19, 2018

How did you paint these for the product pictures? they look great and id like to replicate it if i could, i have enough grey on my warhammer 40k table, the tans would add a nice variation. good with painting but terrible with picking colors myself. These files are great btw, totally worth the cost.
- Matt Barker – May 20, 2018
  
  I sprayed black Army Painter primer and then dry brushes in Army Painter Bronze. I then used a dry black pigment to add the burnt effect
Sakura.j.lim (verified owner) – July 19, 2018

The are 4 pegs ontop of each support but there are no matching holes on the bottom side of the gothic flooring. I see it was asked earlier but it still does not make sense to me why those 4 pegs are there if there is nothing for them to log into and they need to be clipped off to glue anything flat on to the support. Could you explain? I used the gothic floor part R but checked all other pieces and do not see a matching pinpoint. Could you add the matching pinpoints to the gothic scifi floor ?
- Sam Campbell – July 20, 2018
  
  The Bridge Support pegs fit into the square trough underneath the end of the tiles. You clip together your floor tiles so the join sits in the middle of Bridge Support.
trueanimehero – July 20, 2018

If you wanted to build up level heights in the 4 to 8 in area, would this system be able to do that? Do the platforms and supports have pegs to build on the top and bottom to allow for stacking that high up?
- Sam Campbell – July 20, 2018
  
  There are no peg holes underneath the bridge supports to multiple stack the bridge supports.
Sébastien Fournier – August 3, 2020

I am thinking of buying this product but will also be interested in 3 “and 6” supports and ladder as well, can you confirm to me that it will be possible to have them once the product has been purchased ?
- Sam Campbell – August 4, 2020
  
  Thanks for the great suggestion. It’s something we could possibly look at doing in the future.