$9.95
The Gothic Sci-Fi Spike Walls are low walls, ideal for use with the Industrial Walkways and Gothic Sci-Fi Floors. They are compatible with all other OpenLOCK products. Also included are the standard height Gothic columns.
Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Expressionless faces leer from the walls, instilling fear in those without the stomach for adventure.
Updates:
Notes for Gothic Sci-Fi Spike Wall:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
Below you will find instructions for assembling an awesome tables worth of terrain using the Sci-Fi Gothic and Daemon terrain sets, perfect for Warhammer 40K and future dystopic wargames. If you have print fails during the process of creating the ruins do not worry, they are ruins! Eagle eyed people will notice that there are… Read more
Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more
You must be logged in to post a question.
Comments
There are no questions yet.