$14.95
The Deadly Floor Traps set contains pieces to make up to 6 different floor traps: the spear, bear trap, saw blade, acid pit, magical maw and carnivorous worm pit traps. The trap plates are designed as inserts to be placed on top of a blank floor template or magnetic floor template. There are alternate floor insert options for ten popular floor designs that can be found here. Also included are swarms of 3 different sizes for when the carnivorous worms escape the pit.
These are fine detail pieces and are designed to print on an FDM printer at 0.1 resolution at least. The magnet holes are designed for 3mm diameter barrel magnets to be inserted.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
The party raced deeper into the dark wondering what kind of mad tyrant had built this dungeon. From slicing, piercing, chomping traps to acid pits and now giant flesh-eating worms that were chasing them. The treasure promised to them by the hooded stranger had better be worth the escalating risk.
Notes for Deadly Floor Traps:
| Recommended Printer | FDM or resin printer |
|---|---|
| Terrain Tinker | Available |
| Infill | 100% for resin printing, 10% |
| Layer Height | 0.05 high quality on resin printers, .1 high quality |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more
You must be logged in to post a question.
icristian.hrimiuc –
Hello! Is the Dungeon Booster Add-On from the Clorehaven kickstarter still available?
Mike –
Hi!
You can get the dungeon booster add-on but not from the Clorehaven Kickstarter. You’ll find it available in TerrainTinker as a late pledge here: https://www.terraintinker.com/pledge
The fantastic news is that when you purchase it through Terrain Tinker you get full access to it on your Printable Scenery account! So still available!
Thanks
3dndprintfr (verified owner) –
hey. I have a question about the traps. I wonder how to hold the traps insert on the floor with magnets. I understand where they should be on the floor, but what about the plates ? how they stick with the floor ? Thanks you ^^
Mike (Printable Scenery) –
You can attach the plate tops with magnets, glue, blu-tack or even just have them sitting on there. The floor insert has a slight rim around the outside that will hold the traps in place easily.