Description

Snaking their way along the corridors of the ship, the eerily perfect carvings look as though they may have once been part of an alien. Especially here, where a lazily curling spiral seems tail-like enough to potentially have come from an unwary foe.

Updates:

19 April 2017 (version 1.1) Contains Crypt Door Grate.

8 May 18 (version 3.1) Updated to Triplex

Notes for Rampage Necro Wall and Door:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Product measurements can be found in the image gallery.

Additional information

Recommended Printer

FDM or resin printer

Terrain Tinker

Available

File Type

STL files in ZIP folder

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Print Volume

100mm x 100mm x 100mm print build volume required

Supports

Prints without Supports

Scale

32mm Heroic & OpenLOCK

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

19 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

brianhayne123 (verified owner) – March 3, 2020

Hi, I just downloaded these. Are there no corner pillars for this set? How do I make corners? Also, is there a version of the door-way that can clip on both sides? Thanks for your help!

Nicholas Jebson – March 4, 2020

Hey Brian
We don’t have any particular columns for the set as they often get hidden. We used the free pillars in the rampage base pack pack for our one.
I hope this helped
Nick

Ddraig Goch (verified owner) – April 2, 2020

Hi, love these designs. Any chance of a standalone column, a necro version like I-TRP-HeavyWall-v3.4.stl? I’ve got the I columns from the necro mid-wall pack but there isn’t one without open lock column clips in at least one side.

Sam Campbell – April 2, 2020

Great Suggestion, We’ll see if we can do something for this in the future.

Voodoo (verified owner) – April 24, 2020

Can you add a wall section to the necro walls the same as “IN-A” and “IN-B” from crypt walls? Also a short wall version for the curved section?

Sam Campbell – April 24, 2020

Thanks, We will add this to suggestion list for possible future development.

Voodoo (verified owner) – April 26, 2020

and if you decide to add the walls mentioned above could you also add a longer low wall thanks.

Sam Campbell – April 28, 2020

Thanks for the suggestion we’ll add that to possible future development.

erwar76 (verified owner) – December 26, 2020

Tried to print the gate QA above and couldn’t get the bottom of the gate cut loose without destroying it. Is there any chance in a future update that we could get the gate itself separate to print flat?

Nicholas Jebson – December 29, 2020

We can add it to the list of updates certainly. Did you have any additional supports turned on that might have added to it?

brianhayne123 (verified owner) – March 3, 2020

Hi, I just downloaded these. Are there no corner pillars for this set? How do I make corners? Also, is there a version of the door-way that can clip on both sides? Thanks for your help!
- Nicholas Jebson – March 4, 2020
  
  Hey Brian
  We don’t have any particular columns for the set as they often get hidden. We used the free pillars in the rampage base pack pack for our one.
  I hope this helped
  Nick
Ddraig Goch (verified owner) – April 2, 2020

Hi, love these designs. Any chance of a standalone column, a necro version like I-TRP-HeavyWall-v3.4.stl? I’ve got the I columns from the necro mid-wall pack but there isn’t one without open lock column clips in at least one side.
- Sam Campbell – April 2, 2020
  
  Great Suggestion, We’ll see if we can do something for this in the future.
Voodoo (verified owner) – April 24, 2020

Can you add a wall section to the necro walls the same as “IN-A” and “IN-B” from crypt walls? Also a short wall version for the curved section?
- Sam Campbell – April 24, 2020
  
  Thanks, We will add this to suggestion list for possible future development.
Voodoo (verified owner) – April 26, 2020

and if you decide to add the walls mentioned above could you also add a longer low wall thanks.
- Sam Campbell – April 28, 2020
  
  Thanks for the suggestion we’ll add that to possible future development.
erwar76 (verified owner) – December 26, 2020

Tried to print the gate QA above and couldn’t get the bottom of the gate cut loose without destroying it. Is there any chance in a future update that we could get the gate itself separate to print flat?
- Nicholas Jebson – December 29, 2020
  
  We can add it to the list of updates certainly. Did you have any additional supports turned on that might have added to it?