Cart (0)

Product Categories+

Rampage Necro Wall & Door


Any sales taxes will be calculated in the checkout.

The Necro Walls and Door are designed to work with the Necro Floor and Necro Mid Walls, but are compatible with all other OpenLOCK walls and floors.

Please download the Base file set to get the OpenLOCK Clip.


This product is part of the Rampage Complete Dungeon. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Snaking their way along the corridors of the ship, the eerily perfect carvings look as though they may have once been part of an alien. Especially here, where a lazily curling spiral seems tail-like enough to potentially have come from an unwary foe.



  • 19 April 2017 (version 1.1) Contains Crypt Door Grate.
  • 8 May 18 (version 3.1) Updated to Triplex


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.

Additional information

File Type

STL files in ZIP folder


10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Print Volume

100mm x 100mm x 100mm print build volume required


Prints without Supports

5 questions for Rampage Necro Wall & Door

  1. brianhayne123 (verified owner)

    Hi, I just downloaded these. Are there no corner pillars for this set? How do I make corners? Also, is there a version of the door-way that can clip on both sides? Thanks for your help!

    • Nicholas Jebson

      Hey Brian
      We don’t have any particular columns for the set as they often get hidden. We used the free pillars in the rampage base pack pack for our one.
      I hope this helped

  2. Ddraig Goch (verified owner)

    Hi, love these designs. Any chance of a standalone column, a necro version like I-TRP-HeavyWall-v3.4.stl? I’ve got the I columns from the necro mid-wall pack but there isn’t one without open lock column clips in at least one side.

    • Sam Campbell

      Great Suggestion, We’ll see if we can do something for this in the future.

  3. Voodoo (verified owner)

    Can you add a wall section to the necro walls the same as “IN-A” and “IN-B” from crypt walls? Also a short wall version for the curved section?

    • Sam Campbell

      Thanks, We will add this to suggestion list for possible future development.

  4. Voodoo (verified owner)

    and if you decide to add the walls mentioned above could you also add a longer low wall thanks.

    • Sam Campbell

      Thanks for the suggestion we’ll add that to possible future development.

  5. erwar76 (verified owner)

    Tried to print the gate QA above and couldn’t get the bottom of the gate cut loose without destroying it. Is there any chance in a future update that we could get the gate itself separate to print flat?

    • Nicholas Jebson

      We can add it to the list of updates certainly. Did you have any additional supports turned on that might have added to it?

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey