Cart (0)

Product Categories+

Wilderness Scatter


Any sales taxes will be calculated in the checkout.

The Wilderness Scatter is a set of 3 different bamboo 3d printer models. The lush, leafy tops are printed separately and require supports to print in FDM, some gluing is required also.

This product is part of the Gloaming Wilderness. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Clusters of swamp bamboo grow strong and fast within the Gloaming, providing a sure and ready source of building materials for those inhabitants seeking to defend their boundaries from the invading adventures who press ever further into their realm.

Notes for the Wilderness Scatter STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • FDM support file is included in the download.
  • Resin Pre-support is included in the download.
  • Product measurements can be found in the image gallery.
  • First Published version 1.2

Wilderness Scatter Bamboo plant STL

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Requires supports on some files, Resin Pre-support included in the download.

1 question for Wilderness Scatter

  1. Robert Tilt (verified owner)

    Hi there. Quick one: it looks like the FDM-supported leaves aren’t included and there’s a double-up of the resin supported files

    • Jo Boorer (verified owner)

      Hi Robert
      We tried several ways of printing these with supports and found that Chitubox worked best when printing them on an FDM printer this is why they look like a double-up.
      However, the resin ones are tilted where the FDM is at the best angle for FDM printers. Another option is to use the original file and print with supports touching the build plate but these are harder to remove than these. I managed to print these fine at .2 and 15% infill.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey