$9.95
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
The flames spread through the ruined wall hoardings with ease. The many holes to pour hot liquids or shoot arrows through made for a perfect billow to the furnace that was now the walls. It didn’t help that there was spilled tar throughout.
Notes for :
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 10% for FDM printing, 100% for resin printing |
| Layer Height | .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Scale | 32mm Heroic & OpenLOCK |
| Supports | requires supports for resin printing, FDM Prints without support, Print with brim on |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
In this article, we’re going to cover building an Island Diorama for a 3D printed castle using our Throne & Ash models. We’ll show how to build the castle board, paint it, and finish it ready for setting up your castle encounter or wargame. We built our castle on a 6×4-foot table, but you can… Read more
As the catalogue of Throne & Ash models expands, so do the possibilities of things you can build with SystemHEX. As we release new models and complete the range, we’ll produce videos that explain the models and what you can do with them. Below is a playlist of videos we’ve produced for SystemHEX using the… Read more
Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more
With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more
In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more
With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more
In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more
In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more
SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more
You must be logged in to post a question.
Comments
There are no questions yet.