$7.95
The Cavern Floor and Low Walls set is compatible with our other cavern tiles and will allow you to make alternate S-Wall configurations.
Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Light flickers from your torch as you stumble through the cavern, ears and eyes alert for anything lurking around the corners.
Updates:
Notes for Cavern Floor and Low Walls:
| Recommended Printer | FDM or resin printer |
|---|---|
| Terrain Tinker | Available |
| File Type | STL files in ZIP folder |
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Print Volume | 100mm x 100mm x 100mm print build volume required |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more
Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more
You must be logged in to post a question.
Ryan Fitch –
Any plans to make the high walls option?
Matt Barker –
Yes, we have the ‘High Walls’ on our to-do list
Antonio Martorell Ferriol –
It’s any way that I can know if this is part of a kickstarter or not? I’ve tried all codes and no single one work…so this should be a clue but maybe should be some line where say “part of Time wrap castle” or something like that ¿?
Matt Barker –
This set was not part of a Kickstarter, however, we have put it in with the Rampage Dungeons Pledge.
Murdock Scott (verified owner) –
Are the supports on these different than other triplex parts? They seem thicker and I am having trouble knocking them out cleanly.
Matt Barker –
They are the same size as the other supports
Murdock Scott (verified owner) –
Also, is there any plans to expand this set? I got it as part of the “Complete Dungeons” Add-on in the recent kick starter which was very nice as I didn’t have any cavern stuff, but I am finding it a bit lacking in variety. I was kinda hoping to stick with a low wall theme with caverns but feel like I would need more features like what is found in the OpenLOCK Cavern Tiles set (with was not included in Complete Dungeons). Things like diagonal walls, water effects and greater variation. Just trying to decide If I should try to stick to my plan of low wall only, of just go ahead and get the OpenLOCK Cavern Tiles as well. (eventually).
Matt Barker –
Yes we will be making some expansions for the low wall set as its proven to be quite popular
Murdock Scott (verified owner) –
You sir, rock. 😉
John Ware (verified owner) –
Are there wall tiles that runs along the outside and inside of the H floor tile?
And perhaps a floor tile to run along the outside of the H walls?
Jo Boorer –
Currently there is not anything available so we are going to make some within the next week.