Three Simple Market Stalls

$14.95

Any sales taxes will be calculated in the checkout.

Three distinct market stalls for bringing life to the Kingdom.
Contains a produce stall, an outdoor tavern stall, and a butcher.
Detachable roofs and tables to scatter around.
This model is part of the Campaign for Throne and Ash.

This product is part of the Throne and Ash (All 3 Bundles) and Throne & Ash Castle Grounds Bundle.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The market hummed with the usual rabble of peasants. Some pored over the fruit looking for the least rotten apples, while others swatted away flies as they inspected the cheap cuts from the butcher. But most came to the tavern to drink away a few of their woes.

Notes for Three Simple Market Stalls 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
The fruit bar on stall three will need to be glued into place.
The hanging meat and tent will need to be glued on the Butcher stall.
Recommend printing layer height at.1
Product measurements can be found in the image gallery.
First Published version 1.0

Medieval Fruit Market

Ale Stall Reference

Butcher Stall

Butcher Stall Reference

Ale Stall

Ale Stall Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	10% for FDM printing, 100% for resin printing
Layer Height	0.05 high quality on resin printers, .1 high quality
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How to paint castle bricks

Posted on April 29, 2025July 23, 2025 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

10 Comments