Cart (0)

Product Categories+

The Tower of the Screaming Bell Expansion


Any sales taxes will be calculated in the checkout.

The Tower of the Screaming Bell is an expansion option for the City Watch Headquarters.

The main model part can be printed in FDM without the need for supports. It should be printed in the upside-down position as seen in the reference sheet.

This product is part of the Ramshackle, Ruin and Port (All 3 bundles) or Cities of Ramshackle. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Proud dragons support the sharp spire of the tiled roof housing the great bell of the city. One strike for noon, two for approaching vessels, and three ominous bells to warn of attack.

Notes for The Tower of the Screaming Bell STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • This bell is made to be used with the City Watch Headquarters.
  • Product measurements can be found in the image gallery.
  • First Published version 1.2

The Tower of the Screaming Bell STL

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


requires supports for resin printing, Prints without Supports


There are no questions yet.

Be the first to ask a question about “The Tower of the Screaming Bell Expansion”
©2024 Printable Scenery. Website by Vienna & Bailey