The Gates of Ramshackle

Name: The Gates of Ramshackle
Brand: kb-ramshackleandruin
Availability: InStock

$9.95

Any sales taxes will be calculated in the checkout.

The Gates of Ramshackle is a 3D printer model designed to fit with the Ramshackle Ramparts. It includes corbel slots for customization and large, wooden gates that open on a hinge.

This model is part of the Cities of Ramshackle & Ruin Campaign

This product is part of the Cities of Ramshackle

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

As the fortress expanded, the pirates undertook a significant enhancement by constructing a strong ramshackle gate, large enough to accommodate a wagon loaded with supplies. This ensured that their increasingly valuable cargo could be safely transported in and out. Crafted from thick, reinforced timber and rope, these gates were built for size and strength to withstand the persistent threats from rival pirates. The entrance stood as a robust barrier, its imposing presence serving both as a practical means of access and a deterrent to any would-be attackers, signaling that the pirates were prepared to defend their stronghold with greater resolve and resources.

Notes for Gates of Ramshackle 3D Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Important: This product is scaled to 32mm. To print it at 28mm to match the other 28mm terrain, scale it to 90%.
Will need to print with brim on.
A small printer reference sheet is included in the zip file.
Product measurements can be found in the image gallery.
First Published version 1.4

Gates of Ramshackle 3d print file

Additional information

Recommended Printer	FDM or resin printer
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

14 Comments

1 question for The Gates of Ramshackle

Matt Frost (verified owner) – October 5, 2024

What do you recommend for pins to hold the gates?
- Joanne Boorer (verified owner) – October 7, 2024
  
  You can use wire.
  We have used a piece of PLA filament.
  https://youtu.be/vVJGtH55iMQ