$4.95
The Stone Wall Bendy Pack is made up of three walls, in curves of 22.5 and 45 degrees. There are also files provided to print the larger wall in two pieces.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
She carefully pried out the loose rock in the wall and pulled out a crumpled piece of paper, unfolding it. Her mouth dropped and she clutched her gun tightly. It was time. Soon the Vale would be free again.
Notes for Stone Wall Bendy Pack:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
You must be logged in to post a question.
Richard Linnell –
How big of a circle (interior diameter) can you make from these wall sections?
Matthew Barker –
Hi It depends on the scale that you set them to before printing, If you print them as they are you can make a 22inch diameter circle with the large ones and a 10-inch diameter version with the tighter curves