Cart (0)

Product Categories+

Products by Game Type

Product Categories+

Sorcerer’s Tower


The Sorcerer’s Tower is perfect as a centrepiece, for watching over Winterdale, or as a repository of dusty old scrolls for curious adventurers on the way to a dungeon. It is a fantasy-styled building that can be used for role-playing or tabletop war games.

Featuring hinged doors, removable roofs and multiple storeys, it prints without supports as separate levels. Also included in this pack is a small printer version. The lamps need to be printed with supports.


This product is part of the ADD-ON Dwarves, Elves and Demons. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.


High on the hill, the sturdy stone tower has stood watching over the town for as long as anyone can remember. Coloured smoke bursts from its chimney on occasion, and in the highest window, a shape can be seen darting about. The older townsfolk speak of wondrous magics that once spilled forth from the owner’s hands, but the younger ones say this is yet another local legend.



  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • The small printer reference sheet is included in the zip file.
  • To make the hinges, use a small piece of unused filament. You can refer to this video for instructions.
  • Product measurements can be found in the image gallery.



Additional information



Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Prints without Supports, Requires supports on some files

Q & A

  1. Avatar

    Timothy Reese

    This. Is. Gorgeous.

  2. Avatar

    timlaugh (verified owner)

    Would it be possible to separate the balcony from the tower on SorcererTower-Lv4-v1.0 ? like what’s done with the observer tower .

    i kept getting layer shift or extrusion gap while printing the balcony handle pillar along with the rest of the building . i’m printing at standard speed of 60mm/s .

    thank you

    • Sam Campbell

      Sam Campbell (verified owner)

      If your having difficulties it may be good to slow down your extrusion speed for the balcony if you’re having problems with your specific printer. On a Prusa I3 Mk3 this prints out of the box with the general settings.

  3. Avatar

    timlaugh (verified owner)

    thanks , and what would be the recommended extrusion speed for the balcony ?

    • Avatar

      Matt Barker

      It will entirely depend on the capabilities of your printer. Most printers will handle this at full speed. We printed this at standard settings on the Prusa i3 Mk3 without a problem.

  4. Avatar

    hawleydv (verified owner)


  5. Avatar

    Tecwyn (verified owner)

    Could we please get a painting guide? Like what has been provided for some of the other DEAD models. Thank you.

    • Sam Campbell

      Sam Campbell (verified owner)

      We can have a look at doing a painting guide for this.

  6. Avatar

    gene (verified owner)

    How do you recommend printing the lamps? The way they come into prusa they need major supports. I am going to try printing them in the position they fit on the wall.

    • Sam Campbell

      Sam Campbell (verified owner)

      Print the lamps at 0.1 and 100% infill with supports turned on. You can try printing them at 90° upright but will still need supports.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2019 Printable Scenery. Website by Vienna & Bailey