Name: Hex Castle Ruined Queens Quarters
Brand: A Song of Ice & Fire
Availability: InStock

Description

Nobody had seen the Queen since the attack on the castle, and now her quarters lay in ruin; the people feared the worst. Parties were sent to all reaches of the kingdom to see if she had escaped or to find any information on her whereabouts. Not long after the dust settled, the invader’s emissary showed up at the ruined entrance of the castle with a ransom for the King. He would pay anything, but maybe these travelling adventurers could help first…

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here, and painting Wattle & Daub and Roof tiles is here. Check out this article here for tips on printing Throne & Ash models.

Updates:

6 June 2025 (version 3.4) A tighter-fitting Corbel has been added for FDM printers.
12 June 2025 (version 3.5) Chimney option without fire added.
1 August 2025 (version 3.6) Small printer cuts of the chimneys are now available.

Notes for 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
First Published version 3.3

Ruined Queens Quarters Reference

Ruined Queens Quarters STL

Ruined Hex Keep Tower Reference

Ruined Square Bastion Reference

Adaptors, Ladders , Ruined Buttresses and Stairs Reference

Ruined Queens Quarters STL

Throne & Ash components reference

Posted on August 8, 2025August 13, 2025 by Sloane Dougherty

Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more

10 Comments

Building 3D printed scatter terrain for wargames

Posted on July 6, 2025July 23, 2025 by Sloane Dougherty

With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more

How to assemble Throne & Ash 3D printed doors

Posted on June 13, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll show you how to assemble your 3D printed Throne & Ash doors in a few straightforward steps. We’ll show you how to clean up the parts, fit them together, and check that it’s working. You’ll have functional doors throughout your castle in no time, perfect for when players need to sneak… Read more

3 Comments

Tips for 3D printing Throne & Ash models

Posted on June 6, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025July 17, 2025 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

12 Comments

How to paint castle bricks

Posted on April 29, 2025July 23, 2025 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

10 Comments

How to build a square castle

Posted on April 28, 2025July 17, 2025 by Sloane Dougherty

In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more

12 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025July 17, 2025 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

14 Comments

1 question for Hex Castle Ruined Queens Quarters

Christian Lenser (verified owner) – July 21, 2025

I am loving the ruined castle! It would be great to add an option to print the chimney in 2 pieces, the height is too much for my printer.
- Joanne Boorer (verified owner) – July 28, 2025
  
  Thanks for this suggestion. I will add it to our updates list.

Add a question

You must be logged in to post a question.

Recommended Printer	FDM or resin printer
Infill	10% for FDM printing, 100% for resin printing
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support, Requires supports on some files, Resin Pre-support included in the download.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

Hex Castle Ruined Queens Quarters

Description

Additional information

Throne & Ash components reference

Building 3D printed scatter terrain for wargames

How to assemble Throne & Ash 3D printed doors

Tips for 3D printing Throne & Ash models

How to build Castle Agnes using HEX template pieces

How to paint castle bricks

How to build a square castle

Introducing SystemHEX: Our new modular building system

1 question for Hex Castle Ruined Queens Quarters

HEX Castle Ruined Barracks

HEX Castle Queens Quarters

HEX Castle Keep Tower

Ruined Wattle & Daub Hex Tower

HEX Castle Ruined Kings Keep

Ruined Wattle & Daub Living Quarters

Featured Articles

Hex Castle Ruined Queens Quarters

Description

Additional information

1 question for Hex Castle Ruined Queens Quarters

HEX Castle Ruined Barracks

HEX Castle Queens Quarters

HEX Castle Keep Tower

Ruined Wattle & Daub Hex Tower

HEX Castle Ruined Kings Keep

Ruined Wattle & Daub Living Quarters

We use cookies