Name: Rampage Slate Roof
Brand: Dungeons and Dragons
Availability: InStock

Description

Partway through his work, the chimney sweep stopped and mopped his brow, looking out over the town. All about him, a vast sea of slate roofs and jaunty chimneys. No sight could be more beautiful on an autumn afternoon, with Winter hanging just around the corner, and the taxman due any day soon. There’d be work for many a week yet.

Updates:

22 June 2017 (version 1.1) Small mesh repairs to all Slate Roof parts.
25 July 2017 (version 1.2) Contains 6 chimney options and a rounded roof corner tile to go on top of the F and G floor wall combination.
31 August 2017 (version 1.3) Contains A-RPG-Roof-3-End-Mirror-v1.1.
20 April 2018 (version 3.2) Updated to Triplex and Roof Mash now available.
7 May 2018 (version 3.3) E-Riser and E- Roof Middle added.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

rampage-crooked-roof

Additional information

File Type	STL files in ZIP folder
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Print Volume	100mm x 100mm x 100mm print build volume required
Supports	Prints without Supports

14 questions for Rampage Slate Roof

Mitch Cowan – December 24, 2016

Which files would work well with these? Thanks
- Matthew Barker – January 2, 2017
  
  The roofs have been designed to work with the Rampage System but will also work with the Apocaplyse conversions.
Stephan Ziemke (verified owner) – July 6, 2017

The roofs are really great stuff. But i wish to have versions for the round towers.
- Matt Barker – July 7, 2017
  
  Yes we have some new roofs coming soon
Stephan Ziemke (verified owner) – August 28, 2017

The chimneys are a very good idea. Have you also thought about dormer windows ?
- Matt Barker – August 28, 2017
  
  Yes for sure, We are making some versions with dormer windows next week
Ryan Fitch (verified owner) – December 6, 2017

Does anyone know how to make a roof for a room that is larger than 4″ wide? I don’t know how to fill in the flat gap.
- Matt Barker – December 9, 2017
  
  Ill need to make a riser for this. ill add it to the updates
Robert Gorman – January 10, 2018

Any plans to add ruined or damaged sections to the roofs?
- Matt Barker – January 10, 2018
  
  Yes we have ruined sections coming up in the next Kickstarter
jasharen (verified owner) – February 6, 2018

It is mentioned above that a riser was in the works a few months ago? Is this still planned? I’m trying to get a larger building finished and am waiting on that riser 🙂
- Rex Foot – February 12, 2018
  
  We hope to have it done within the next few weeks.
rfdinizpimentel – February 26, 2018

is possible to make higher roofs? how to do If I build a larger house or castle and need a higher roof to join both sides, for example the “Old Stone House Wall Set” the big house in picture, how to join the roof’s two sides
- Matt Barker – February 28, 2018
  
  Yes, I’m working on a riser that will lift the middle sections
Ryan Fitch (verified owner) – May 8, 2018

Yay risers! Thanks Matt.
christopherlnance (verified owner) – October 4, 2018

Good Day, I just printed the FQC-TRP-Roof-Chimney-v3.0 and the FQ-TRP-Roof-v3.0. I see that the FQC on is bigger and I’m having a difficult time finding the walls the FQC on matches up to. Please advise. Thanks.
- Sam Campbell – October 5, 2018
  
  The FQC was created larger than the FQ for those people who wanted the roof to have more of a over hang.
George Sealy (verified owner) – November 19, 2018

Hi there, a question about larger roof sizes. I can see that 2 sections back to back will give me a roof for a 4″ wide building, and with risers I can do an 8″ width. But unless I’m missing something, there’s no way to manage, say, a 6″ wide roof? Would it be possible to add a 2″ wide ridge for this purpose? Although I guess that could get trickier around corners etc…
- Matt Barker – November 20, 2018
  
  We are working on some new roof parts. We will have an update ready by the end of the week
tabletoparmorystore (verified owner) – January 13, 2019

Was wondering if you were ever able to work on the parts to build roof tops wider than 4″. I saw that you said you were working on them and would have an update ready in November.
- Sam Campbell – January 16, 2019
  
  We are still working on the roofing system and testing a lot of designs.
joe – March 9, 2019

The question posed by tabletoparmorystore, Question number 11, is the only reason I am holding off on purchasing these models. I need at least some sort of filler for larger footprint buildings. Sadly until then I might as well stick with open top buildings even though having a solution to cover buildings with more than one side larger than 4 squares would be great. When/if you do come up with a solution I will be like Fry in Futurama commanding you to take my money!

This being said any word yet on the system and designs you were working on?
- Sam Campbell – March 11, 2019
  
  Yes, This will be in our next Kickstarter.
R. Greg Szrama (verified owner) – August 21, 2019

Any chance for some X roofs?
- Sam Campbell – August 21, 2019
  
  The X piece is a thin strip. We’re not looking at upgrading this set and looking at a different separate modular roof system for Clorehaven Kickstarter. It was one of the listed stretch goals and will be available in the next few months
Aaron Smith – September 20, 2022

Is the Modular Shingle Roof product the modular set you are describing? I have a lot of buildings, and not a single one with a roof. 🙂 So I am trying to figure out which roofing system is going to work. Looks like this one is not getting updates – and perhaps the Modular product is the most up to date?

Thanks.
- Jo Boorer – September 20, 2022
  
  The Rampage slate roof works with both the Rampage dungeon range and the Rampage Castle. The modular Shingle roof is made for the Clorehaven range.