Name: Hex Castle Low Angular Walls
Brand: A Song of Ice & Fire
Availability: InStock
Rating: 5.00 (1 reviews)

Description

These low, angular walls weren’t as defensible as the taller, more imposing walls in the inner city. Riff raff could easily bring along a few ladders and be over in no time. But the captain was sure they’d do well enough when stationed with a few of his trusty crossbowmen when the time came.

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here. Check out this article here for tips on printing Throne & Ash models.

See below how the HEX Castle Angular Walls tessellate with SystemHEX.

3D top down render of the angular walls

Notes for :

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small Printer Reference is included in the zip file.
Please note that the 90-degree wall is a square tessellation, not a hexagonal tessellation.
Product measurements can be found in the image gallery.
First Published version 1.0

Low Angular Walls Reference

Building a 3D Printed Island Castle Diorama

Posted on February 17, 2026February 25, 2026 by Sloane Dougherty

In this article, we’re going to cover building an Island Diorama for a 3D printed castle using our Throne & Ash models. We’ll show how to build the castle board, paint it, and finish it ready for setting up your castle encounter or wargame. We built our castle on a 6×4-foot table, but you can… Read more

5 Comments

SystemHEX Video Guides

Posted on November 28, 2025November 28, 2025 by Sloane Dougherty

As the catalogue of Throne & Ash models expands, so do the possibilities of things you can build with SystemHEX. As we release new models and complete the range, we’ll produce videos that explain the models and what you can do with them. Below is a playlist of videos we’ve produced for SystemHEX using the… Read more

Throne & Ash components reference

Posted on August 8, 2025November 25, 2025 by Sloane Dougherty

Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more

16 Comments

Building 3D printed scatter terrain for wargames

Posted on July 6, 2025October 23, 2025 by Sloane Dougherty

With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more

Tips for 3D printing Throne & Ash models

Posted on June 6, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more

11 Comments

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025April 3, 2026 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

17 Comments

How to paint castle bricks

Posted on April 29, 2025February 25, 2026 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

15 Comments

How to build a square castle

Posted on April 28, 2025July 17, 2025 by Sloane Dougherty

In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more

18 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025February 25, 2026 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

20 Comments

1 question for Hex Castle Low Angular Walls

Rated 5 out of 5

Lachy (verified owner) – May 9, 2026

Yesssss!!!

Low walls have been fantastic for skirmish gaming, angular walls are just what I was hoping for to cap off the collection. THANK YOU!!!
- Joanne Boorer (verified owner) – May 12, 2026
  
  Thanks for the great feedback.

Add a question

You must be logged in to post a question.

Recommended Printer	FDM or resin printer
Infill	10% for FDM printing, 100% for resin printing
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support, Requires supports on some files, Resin Pre-support included in the download.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

Hex Castle Low Angular Walls

Description

Additional information

Building a 3D Printed Island Castle Diorama

SystemHEX Video Guides

Throne & Ash components reference

Building 3D printed scatter terrain for wargames

Tips for 3D printing Throne & Ash models

How to build Castle Agnes using HEX template pieces

How to paint castle bricks

How to build a square castle

Introducing SystemHEX: Our new modular building system

1 question for Hex Castle Low Angular Walls

Hex Castle Ruined Angular Walls

Hex Castle Low Walls

Hex Castle Wall Steps

Ruined Queens Quarters

Hex Castle Walls

Hex Castle Angular Walls

Featured Articles

Hex Castle Low Angular Walls

Description

Additional information

1 question for Hex Castle Low Angular Walls

Hex Castle Ruined Angular Walls

Hex Castle Low Walls

Hex Castle Wall Steps

Ruined Queens Quarters

Hex Castle Walls

Hex Castle Angular Walls

We use cookies