Name: Halfling Hole
Brand: Age of Sigmar
Availability: InStock

Halfling Hole

$9.95

Any sales taxes will be calculated in the checkout.

The Halfling Homes are designed so that you can use them as a stand-alone home or hill. We have designed them as a flat top with a cliff-side style hill, so you can stand your minis on top.

You can also embed these homes into 50mm polystyrene and cover in ‘flock’ to make an amazing Halfling village.

Using the guide holes and spare filament you can secure the roof of the building in place. Our guide on how to do this can be found here.

This product is part of the APOC Stone Ruins

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Halflings hollow out hills to build their homes in. The exact reason for this is unclear, but the end result is guaranteed to be both cozy and secure.

Updates:

25 November 2022 (version 5.2) Locking pins added and filament connection so the door can open.
24 January 2024 (version 5.3) Chair and Stool added.

Notes for Halfling Hole:

The Halfling Hole will print without supports and requires a 150mm print bed.
Cut sections for small printers have been included in the file pack.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Hobbit Halfling Hole STL

Additional information

Recommended Printer	FDM or resin printer
File Type	STL files in ZIP folder
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Dimensions	Dimensions and weights are available in the image gallery
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

1 question for Halfling Hole

Emmanuel de Coninck – July 25, 2020

Is it possible to rework the roof to make it more round like a dome? It will look more like a halfling hole than with a flat roof.
- Sam Campbell – July 27, 2020
  
  Thanks for the suggestion. It’s something we can look at doing in the future.