Name: The Counts Tower
Brand: A Song of Ice & Fire
Availability: InStock

Description

The Count demanded excellence in all things, and his tower was no different. Only the best bricks, the finest wood, and the most distinguished builders were permitted by the Count. Not that any of it mattered once the invaders set their sights on it with thier siege equipment. It crumbled like all other towers made of bricks and wood and made by great builders.

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here, and painting Wattle & Daub and Roof tiles is here. Check out this article here for tips on printing Throne & Ash models.

See below how the HEX Castle Count’s Tower tessellates with the Castle Walls.

3D top down render of adeline tower

Notes for 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Where buttresses are placed and the stairs, the flat wall plug will need to be used underneath.
Product measurements can be found in the image gallery.
First Published version 1.1

Counts Tower STL

Adaptors, Buttress and Ladders Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	10% for FDM printing, 100% for resin printing
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)