Name: Castle Church
Brand: A Song of Ice & Fire
Availability: InStock

Description

The Bishop ushered his parishioners hastily inside the Castle Church as the invaders’ horns blared from outside the walls. They barred the doors and hunkered down to pray for safety, but it wasn’t long before they heard bangs on the Church doors, one at first, then more and more. With a crash of splintering wood and a scream from the people inside, the killing began.

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here, and painting Wattle & Daub and Roof tiles is here. Check out this article here for tips on printing Throne & Ash models.

See below how the HEX Castle Church tessellates with the Castle Walls.

HEX Template for Castle Barracks

Notes for 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Recommend printing Window plugs at 0.1
Product measurements can be found in the image gallery.
First Published version 1.1

Castle Church Reference

Adaptors, Buttress, and Ladders Reference

Adaptors, Buttress and Ladders Reference

Whole Level Reference

Building a 3D Printed Island Castle Diorama

Posted on February 17, 2026February 25, 2026 by Sloane Dougherty

In this article, we’re going to cover building an Island Diorama for a 3D printed castle using our Throne & Ash models. We’ll show how to build the castle board, paint it, and finish it ready for setting up your castle encounter or wargame. We built our castle on a 6×4-foot table, but you can… Read more

5 Comments

SystemHEX Video Guides

Posted on November 28, 2025November 28, 2025 by Sloane Dougherty

As the catalogue of Throne & Ash models expands, so do the possibilities of things you can build with SystemHEX. As we release new models and complete the range, we’ll produce videos that explain the models and what you can do with them. Below is a playlist of videos we’ve produced for SystemHEX using the… Read more

Throne & Ash components reference

Posted on August 8, 2025November 25, 2025 by Sloane Dougherty

Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more

16 Comments

Building 3D printed scatter terrain for wargames

Posted on July 6, 2025October 23, 2025 by Sloane Dougherty

With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more

How to assemble Throne & Ash 3D printed doors

Posted on June 13, 2025February 25, 2026 by Sloane Dougherty

In this article, we’ll show you how to assemble your 3D printed Throne & Ash doors in a few straightforward steps. We’ll show you how to clean up the parts, fit them together, and check that it’s working. You’ll have functional doors throughout your castle in no time, perfect for when players need to sneak… Read more

5 Comments

Tips for 3D printing Throne & Ash models

Posted on June 6, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more

8 Comments

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025November 25, 2025 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

16 Comments

How to paint castle bricks

Posted on April 29, 2025February 25, 2026 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

15 Comments

How to build a square castle

Posted on April 28, 2025July 17, 2025 by Sloane Dougherty

In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more

18 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025February 25, 2026 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

14 Comments

Comments

Merlin – October 1, 2025

Even it’s not in the campaign, but I’d love to have a ruined version of this beauty
- Joanne Boorer – October 2, 2025
  
  Thanks for your suggestion. I will add this to the wish list.
jackieq – March 6, 2026

Wow, those rose windows!! What a treat.
- Joanne Boorer (verified owner) – March 9, 2026
  
  Thanks for your great feedback.
The reluctant expert (verified owner) – March 7, 2026

is level 4 compatible with the small square bastion?
and… is church level 3 a roof that transitions from a regular square to a small square that’s fun!
- Joanne Boorer (verified owner) – March 9, 2026
  
  Yes, You are correct. These parts are compatible.

Add a question

You must be logged in to post a question.

Recommended Printer	FDM or resin printer
Infill	10% for FDM printing, 100% for resin printing
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support, FDM-Pre support included

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

Castle Church

Description

Additional information

Building a 3D Printed Island Castle Diorama

SystemHEX Video Guides

Throne & Ash components reference

Building 3D printed scatter terrain for wargames

How to assemble Throne & Ash 3D printed doors

Tips for 3D printing Throne & Ash models

How to build Castle Agnes using HEX template pieces

How to paint castle bricks

How to build a square castle

Introducing SystemHEX: Our new modular building system

Comments

Training Grounds

Small Chapel

Stone Gazebo

Throne Room Furnishings

Castle Hedges

Ruined Small Chapel

Featured Articles

Castle Church

Description

Additional information

Comments

Training Grounds

Small Chapel

Stone Gazebo

Throne Room Furnishings

Castle Hedges

Ruined Small Chapel

We use cookies