Cart (0)

Product Categories+

Bridge Troll


Any sales taxes will be calculated in the checkout.

The Bridge troll comes with 4 variant poses, including hurling a boulder and lying down flat in “bridge mode”. Printed in resin, each file comes pre-supported for ease of printing. It is also possible to print them in FDM.

This product is part of the Gloaming Swamps. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


With its heavily plated back of weathered and cracked, scaly hide, the Bridge Troll has learned what little wits it has to mimic the look of a common bridge in the Gloaming by lying face down in a stretch of bog and arching its back. A devious trick it puts to good use to capture unsuspecting adventures. 

Notes for the Bridge Troll STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Some parts require support for FDM printing.
  • Product measurements can be found in the image gallery.
  • First Published version 1.2

Bridge Troll Reference

Bridge Troll STL

Bridge Troll Attack Reference

Bridge Troll Rising Reference

Bridge Troll Throwing Reference

Additional information


10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength


pre-support version included in download., Requires supports for fdm printing, Prints without Supports

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


There are no questions yet.

Be the first to ask a question about “Bridge Troll”
©2024 Printable Scenery. Website by Vienna & Bailey