Dwarven Columns

$3.95

Any sales taxes will be calculated in the checkout.

The Dwarven Columns are compatible with all other OpenLOCK products.

Ideal for use with Dwarven Tribute Wall and Dwarven Archways.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

This product is part of the Gothic Industrial

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

As sturdy as the hands of the masterful craftsmen who built them, the ornate columns stood proud and strong, as though Time itself could not wear them down.

Notes for Dwarven Columns:

Walls in the gallery pic are not part of this pack. These can be found in Dwarven Tribute Wall.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments