Trench Bell

$9.95

Any sales taxes will be calculated in the checkout.

A lone trench bell tolling for the passing of the damned and sainted alike.
A set piece that can be used as part of the modular SystemHEX range
Compatible with all other Darkness & Desolation models, as well as other SystemHEX models from Throne & Ash.

This product is part of the Trench Tombs Bundle and Darkness and Desolation (All 3 Bundles).

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Salvaged from a destroyed cathedral, it is unknown who erected this bell amongst the trenches, but its mournful toll can be heard echoing across the battlefield, a solitary sound easily distinguished amongst the more commonplace explosions and weapons fire.

Trench Bell HEX layout

Notes for Trench Bell 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small Printer Reference included in the zip file.
Product measurements can be found in the image gallery.
First Published version 1.2

Trench Bell Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 15%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How To Paint The 3D Printed Trench Walls from Darkness & Desolation

Posted on July 28, 2026July 28, 2026 by Sloane Dougherty

In this article, we’ll show you how to paint the 3D printed Trench Walls from our Darkness & Desolation campaign. We’ll cover the paints needed, the techniques we used, and any tips along the way to get your Trench Walls ready for the tabletop. The methods in this guide can be used on all of… Read more