HEX Castle Ruined Bowmans Battlement

$9.95

Any sales taxes will be calculated in the checkout.

The Ruined Bowmans Battlements are a destroyed variation of crenelated walls, and contain five different tessellations, the same as the regular HEX Castle Walls, and connect with them seamlessly. Also included are entirely destroyed wall ends, which are good for making standalone scatter terrain. This model is part of the Campaign for Throne and Ash.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The invader stepped through the opening left by the catapult, the dust still settling in a cloud around the ruined battlement that once served as an archer’s post. The shouting and crying stopped for a brief moment, and all he could hear was the crunch of his boot over debris and shattered wood. But then he felt something give, something soft under his heel. He looked down to inspect it as an arm spun around to meet him. The last thing the invader saw was a dust-covered smile and an arrow pointed at his eye.

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here. Check out this article here for tips on printing Throne & Ash models.

Notes for Bowmans Battlement Ruined 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Small Printer Reference is included in the zip file.

Product measurements can be found in the image gallery.

First Published version 1.0

Additional information

Recommended Printer

FDM or resin printer

Infill

10% for FDM printing, 100% for resin printing

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Scale

32mm Heroic & OpenLOCK

Supports

requires supports for resin printing, FDM Prints without support, Requires supports on some files, Resin Pre-support included in the download.

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

Throne & Ash components reference

Posted on August 8, 2025August 13, 2025 by Sloane Dougherty

Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more

10 Comments

Building 3D printed scatter terrain for wargames

Posted on July 6, 2025July 23, 2025 by Sloane Dougherty

With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more

Tips for 3D printing Throne & Ash models

Posted on June 6, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025July 17, 2025 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

12 Comments

How to paint castle bricks

Posted on April 29, 2025July 23, 2025 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

10 Comments

How to build a square castle

Posted on April 28, 2025July 17, 2025 by Sloane Dougherty

In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more

12 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025July 17, 2025 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

14 Comments

HEX Castle Ruined Bowmans Battlement

Description

Additional information

Comments

We use cookies