Description

The sun sets behind the distant mountain range, bathing the ruined keep in a faintly warm light. The half-toppled towers and collapsed walls lay quiet. It had been a full day since the siege had ended, and the castle had been sacked, but dust still glimmered in the air as beams of light shot through the cavities in the walls. A rat scurries over the bricks and beams scattered on the floor and stops to gnaw a tattered piece of fabric but is started away by the rumble of debris. Slowly, stiffly, an armoured gauntlet rises from the pile, still clutching the ruined blade, Lion’s Claw. The King yet lived.

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here, and painting Wattle & Daub and Roof tiles is here. Check out this article here for tips on printing Throne & Ash models.

Updates:

21 May 2025 (version 1.2) Now includes plug-in slide.
30 May 2025 (version 1.3): Lv1’s height has been slightly adjusted and now includes an Lv1 Plug option.
6 June 2025 (version 1.4) Now includes a tighter fitting corbel for FDM printers

Notes for HEX Castle Ruined Kings Keep 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small Printer Reference and Large Printer Reference sheets are included in the zip file.
Product measurements can be found in the image gallery.
First Published version 1.1

Adaptors, Buttresses, and Stairs Reference

Hex Castle Ruined Kings Keep

Ruined Keep Tower Reference

Hex Castle Ruined Kings Keep Reference

Hex Castle Ruined Kings Keep

Throne & Ash components reference

Posted on August 8, 2025August 13, 2025 by Sloane Dougherty

Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more

10 Comments

Building 3D printed scatter terrain for wargames

Posted on July 6, 2025July 23, 2025 by Sloane Dougherty

With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more

How to assemble Throne & Ash 3D printed doors

Posted on June 13, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll show you how to assemble your 3D printed Throne & Ash doors in a few straightforward steps. We’ll show you how to clean up the parts, fit them together, and check that it’s working. You’ll have functional doors throughout your castle in no time, perfect for when players need to sneak… Read more

3 Comments

Tips for 3D printing Throne & Ash models

Posted on June 6, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025July 17, 2025 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

12 Comments

How to paint Wattle & Daub and Roof Tiles

Posted on May 26, 2025July 23, 2025 by Sloane Dougherty

In this tutorial, we’ll cover how we painted the wattle & daub areas and roof tiles from our Throne & Ash campaign. It’s very simple to recreate and uses simple techniques. Wattle & Daub is found on many of the Throne & Ash buildings, and there will be more to come as the stretch goal… Read more

14 Comments

How to paint castle bricks

Posted on April 29, 2025July 23, 2025 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

10 Comments

How to build a square castle

Posted on April 28, 2025July 17, 2025 by Sloane Dougherty

In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more

12 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025July 17, 2025 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

14 Comments

Recommended Printer	FDM or resin printer
Infill	10% for FDM printing, 100% for resin printing
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support, Requires supports on some files, Resin Pre-support included in the download.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

HEX Castle Ruined Kings Keep

Description

Additional information

Throne & Ash components reference

Building 3D printed scatter terrain for wargames

How to assemble Throne & Ash 3D printed doors

Tips for 3D printing Throne & Ash models

How to build Castle Agnes using HEX template pieces

How to paint Wattle & Daub and Roof Tiles

How to paint castle bricks

How to build a square castle

Introducing SystemHEX: Our new modular building system

Comments

HEX Castle Ruined Keep Tower

HEX Castle Ruined Oval Bastion

HEX Castle Ruined Walls

HEX Castle Ruined Wall Turrets

HEX Castle Ruined Gatehouse

HEX Castle Ruined Barracks

Featured Articles

HEX Castle Ruined Kings Keep

Description

Additional information

Comments

HEX Castle Ruined Keep Tower

HEX Castle Ruined Oval Bastion

HEX Castle Ruined Walls

HEX Castle Ruined Wall Turrets

HEX Castle Ruined Gatehouse

HEX Castle Ruined Barracks

We use cookies