Wilderness Scatter

$5.95

Any sales taxes will be calculated in the checkout.

The Wilderness Scatter is a set of 3 different bamboo 3d printer models. The lush, leafy tops are printed separately and require supports to print in FDM, some gluing is required also.

This product is part of the Gloaming Wilderness

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Clusters of swamp bamboo grow strong and fast within the Gloaming, providing a sure and ready source of building materials for those inhabitants seeking to defend their boundaries from the invading adventures who press ever further into their realm.

Notes for the Wilderness Scatter STL:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
FDM support file is included in the download.
Resin Pre-support is included in the download.
Product measurements can be found in the image gallery.
First Published version 1.2

Wilderness Scatter Bamboo plant STL

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	Requires supports on some files, Resin Pre-support included in the download.
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

The Gloaming Swamps 3D Printer Model Painting Guides

Posted on November 30, 2023July 8, 2025 by Mike Los

All of the 3D printer models from the Gloaming Swamps and Wilderness Kickstarter are now available to download and print. Throughout the campaign, we have been creating painting panels for each 3D printer model as it became available. We are pleased to present them all to you here in one place, along with a few… Read more

2 Comments

Comments

Robert Tilt (verified owner) – April 3, 2024

Hi there. Quick one: it looks like the FDM-supported leaves aren’t included and there’s a double-up of the resin supported files
- Jo Boorer (verified owner) – April 3, 2024
  
  Hi Robert
  We tried several ways of printing these with supports and found that Chitubox worked best when printing them on an FDM printer this is why they look like a double-up.
  However, the resin ones are tilted where the FDM is at the best angle for FDM printers. Another option is to use the original file and print with supports touching the build plate but these are harder to remove than these. I managed to print these fine at .2 and 15% infill.