Bridge Troll

$11.95

Any sales taxes will be calculated in the checkout.

The Bridge troll comes with 4 variant poses, including hurling a boulder and lying down flat in “bridge mode”. Printed in resin, each file comes pre-supported for ease of printing. It is also possible to print them in FDM.

This product is part of the Gloaming Swamps

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

With its heavily plated back of weathered and cracked, scaly hide, the Bridge Troll has learned what little wits it has to mimic the look of a common bridge in the Gloaming by lying face down in a stretch of bog and arching its back. A devious trick it puts to good use to capture unsuspecting adventures.

Notes for the Bridge Troll STL:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Some parts require support for FDM printing.
Product measurements can be found in the image gallery.
First Published version 1.2

Bridge Troll Reference

Bridge Troll STL

Bridge Troll Attack Reference

Bridge Troll Rising Reference

Bridge Troll Throwing Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Supports	pre-support version included in download., Requires supports for fdm printing, Prints without Supports
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

The Gloaming Swamps 3D Printer Model Painting Guides

Posted on November 30, 2023July 8, 2025 by Mike Los

All of the 3D printer models from the Gloaming Swamps and Wilderness Kickstarter are now available to download and print. Throughout the campaign, we have been creating painting panels for each 3D printer model as it became available. We are pleased to present them all to you here in one place, along with a few… Read more