Description

“This two-headed demon, part reptile, part humanoid, and all terrifying, has spelled the end for far better opponents than yourself. His hypnotic gaze has been known to stop his enemies in their tracks, while his mere touch is rumoured to rot flesh instantaneously.”

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 20%
Layer Height	0.05 high quality on resin printers, .1 high quality
Supports	requires supports for resin printing, Supports touching buildplate
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Warforge (verified owner) – March 25, 2019

When printing with the above information, how slow is slow? 60mm/s slow enough or more? Thanks
- Sam Campbell – March 26, 2019
  
  5-10mm/s slower than your normal speed.