Description

Bubbling lava pops and boils within the rock-lined pit, cooking the air above it and singing the hair of anyone passing too close by.

Updates:

12 November 2019 (version 1.1) Bases have had level adjustments made on Burbling-Pit-Lava-3 and Burbling-Pit-Skull-1.

Notes for Burbling Pits:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

shawn.schultz (verified owner) – October 27, 2019

I’m getting an error in my Prusa Slicer trying to export this to G-Code. The error reads: “Empty layers detected, the output would not be printable”.

This is my first print of the burbling pits. I’m trying to print 3 models on the tray: Burbling-pit-lava-2.stl, burbling-pit-lava-3.stl, and burbling-pit-skull-1.stl

So at least one of those has the error. I haven’t been able to find which one. Thanks!
- Sam Campbell (verified owner) – October 29, 2019
  
  Thanks, We’ll get this updated.
Justin Dement – March 22, 2022

Does come with STL’s for small form printers?
- Mike (Printable Scenery) – March 22, 2022
  
  They don’t currently but I’ll add it to our list of model updates to be done in the future.