Cart (0)

Product Categories+

The Royal Gate

(8 customer reviews)


Any sales taxes will be calculated in the checkout.

The Royal Gate is a fortified entry-way designed to fit between two prints of the King’s Round Tower. Its top level lifts off to access the walkway between the towers. It also includes a portcullis that can be lifted up into the second floor of the gate.

This product is part of the Complete King. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


 The first, and for some, last great visual image of his Majesties might. Those who pass through the Royal Gate had best please the King with their news or offerings if they wish to return the same way.  


  • 18 May 2023 (version 1.1) Now includes a double Portcullis option, Drawbridge option, and Extension.
  • 25 August 2023 (version 1.2) Includes Flat Ends option.

Notes for The Royal Gate STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.
  • First Published version 1.0

Royal Gate STL

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


requires supports for resin printing, Prints without Supports

8 questions for The Royal Gate

  1. Carl Schdroski (verified owner)

    Will you be doing a wall extension in this set?

    • Jo Boorer (verified owner)

      Good idea. We will get this done.

  2. justin.littlehammer (verified owner)

    Is it possible to get a draw bridge for this as well? Also, can you have an option that has two portcullis? Trap people inside. If they get through the first one, soldiers above could attack them through holes while they try to get past the next portcullis. Or just have a draw bridge on one side and the portcullis on the opposite? Love the models and can’t wait for the wall extensions.

    • Jo Boorer (verified owner)

      Thats for your suggestion. I will add it to our list of possible model updates.

  3. Roem (verified owner)

    Are we able to get a wall extension insert to use with this if we are also using the inserts in the towers? Thanks.

    • Jo Boorer (verified owner)

      This is currently being done plus other updates for this product.

  4. justin.littlehammer (verified owner)

    Update 1.1 is great. Any way to get the gate so it can be used with the walls? Remove the cut outs for the towers and allow for Walls to go straight to it? Keep up the great work.

    • Jo Boorer (verified owner)

      Thanks for your suggestion we will put this on our model updates list.

  5. tristan pittendorfer (verified owner)

    Would like to see extensions for the sides, so the towers are not quite so close. Thanks

    • Jo Boorer (verified owner)

      This is currently on our update list.

  6. aaron currence (verified owner)

    I’m confused by the statement about supports. I have a resin printer, and the web page says it needs supports for resin but then right after it says it will print with out supports.

    • Jo Boorer (verified owner)

      Print without supports refers to FDM printers. Supports recommended for resin printers.

  7. paintingcoach1 (verified owner)

    Is it possible to get a Level 3 piece with 180 Doorways in it? this way you have doorways to access the battlement above the door, and also the battlements of the walls when used with extenders to increase height. The Current L2 with 180 doorways in my download is the same shape as an L3 piece (to support the wider roof section) but will only fit on top of as L1 piece

    • Matt Barker

      Yes we can do that no problem. Ill add it to the next update

  8. CristianSCooney (verified owner)

    Can you complete the square ends so the gate becomes a standalone piece (walls/crenellations) on all four sides?

    • Jo Boorer (verified owner)

      Hi Cristian

      Thanks for your suggestion.
      Can you please send a picture of your suggestion to [email protected] so that we can add it to our model’s update list.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey