Cart (0)

Product Categories+

Kings Gate


The Kings Gate contains three stories, each with internal details and room-to-place miniatures. The second floor includes a balcony to access battlements, whilst the ground floor has strong gates to defend the castle with. These doors are on axles, so you may open and close them as you see fit.

This product is part of the Country and King Late pledge or King Late pledge. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.


A towering Bastion of his Majesties might, the Kings gate can be manned with a great host of his royal crossbowmen, with thickly hewn oaken doors and an iron portcullis ready to keep out any invader or unleash his thundering cavalry upon them.


  • 10 January 2023 (version 1.2) Level 3 now has correct pin cavities.

Notes for Kings Gate STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Small Printer reference sheet is included in the zip file.
  • Product measurements can be found in the image gallery.
  • First Published version 1.1

Kings Gate Entrance STL

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


requires supports for resin printing, Prints without Supports

2 questions for Kings Gate

  1. ben.holian (verified owner)

    Hi there,

    Loving your STLs as always 🙂

    I have been printing the Kings Gate, and I have noticed that level 3’s sockets dont seem to line up with the Level 2’s keys. I suspect I’m missing something obvious, but it looks like there should be something between them, or that there was/is a v1.1 of Level 3 that didnt make it into this bundle that had the sockets wider on bottom to accomodate the pegs correctly.

    • Jo Boorer (verified owner)

      Thanks for pointing this out to us. I have added the correct level 3 to this product.

  2. Roem (verified owner)

    Will this be made to work with the taller walls achieved using the wall extensions? Possibly a spacer between the first and second floors that would make the walkways line up?

    • Jo Boorer (verified owner)

      Yes, we will have this available soon.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2023 Printable Scenery. Website by Vienna & Bailey