Name: Siege Tower
Brand: Age of Sigmar
Availability: InStock

Description

A clear and real danger to the defenders of any fortification, these towering constructs of wood, dried hide and metal conceal the attackers from arrows and projectiles until it they can breach the walls.

Updates:

14 June 2017 (version 1.0) Small mesh repairs to Siege-tower-2-v1.0, Siege-tower-3-v1.0, Siege-tower-4-v1.0, Siege-tower-Door-v1.0.

Notes for Siege Tower:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .1 high quality
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

bilbo.gasgal (verified owner) – October 27, 2017

At which heigth does the door open when the tower is printed at 100% size?
- Matt Barker – November 10, 2017
  
  The height to the door at the top is 11cm (8.25 inch)
John Rykert (verified owner) – June 12, 2018

Please do a 15mm version of this model. When I reduced it to that scale, the walls were too thin. Thanks!
- Matt Barker – June 12, 2018
  
  We have added this to our to-do list, however the to-do list is quite long
Pauli Savolainen (verified owner) – December 1, 2020

Hello!

Indeed, please do a smaller version of the model. The walls are too thin. I’m aiming for 10mm version of this. Looks great but now I bought it in vain.
Thanks!
Eric Dalongeville (verified owner) – November 9, 2024

Hello!
I don’t understand why there are circular holes in the model (visible on the painted model on the listing).

Do they serve any purpose ?
- Joanne Boorer – November 11, 2024
  
  Hi Eric. Thanks for reaching out. The holes show where bolts have fallen out.