Cart (0)

Product Categories+

Ramshackle Rope Bridges

(2 customer reviews)


Any sales taxes will be calculated in the checkout.

The Ramshackle Rope Bridges are a set of FDM 3D Printer models designed to extend between the Ramshackle Rocks. Wide enough accommodate most gaming miniatures, they provide extra access and interest for your tabletop encounters.

This model is part of the Cities of Ramshackle & Ruin Campaign

This product is part of the Port of Ramshackle or Ramshackle, Ruin and Port (All 3 bundles). Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.


A simple and accessible means for traversing the shark-infested waters between the shipwrecked shanties scattered about the port city. Still, one must brave them at their own risk for one snaped coil could send you plummeting to the rocks and waters below.

Notes for The Ramshackle Rope Bridges STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Important: This product is scaled to 32mm. To print it at 28mm to match other 28mm terrain, scale to 90%.
  • A small printer reference is included in the download.
  • The bent bridges will need FDM support to touching the build plate.
  • Product measurements can be found in the image gallery.
  • First Published version 1.1

Ramshackle Rope Bridges STL

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


requires supports for resin printing, FDM support touching buildplate

2 questions for Ramshackle Rope Bridges

  1. Luke Everall (verified owner)

    Hi there. Previously I have heated and bent bridges to get a dip in the middle. You have thoughtfully presented pre-bent versions (I anticipate heating and bending the rope versions will be problematic).

    My assumption is that the pre-bent files will require FDM supports, and a signpost message to that effect might help some users.

    Great models, as always!

  2. Joanne Boorer (verified owner)

    Hi Luke

    Thanks for pointing this out.
    I had stated both in the notes and Attributes that support would be required but I have now updated these to state FDM.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey