Name: Citadel Grimskull
Brand: Age of Sigmar
Availability: InStock

Citadel Grimskull

$14.95

Any sales taxes will be calculated in the checkout.

Citadel GrimSkull is a modular fantasy-styled citadel. This pack contains the pieces for the tower itself, as well as walls and gates.

The tower comes in three options: square connection, hex connection and a stand-alone version.

The ‘Claw Tops’ can be printed as open or closed versions, however if you want to place minis on the top, you need to use the open version.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Built by a Necromancer with either a twisted sense of irony or an obsession with skulls, Citadel GrimSkull is an imposing sight.

Updates:

28 June 2017 (version 1.0) Small mesh repairs to Skull-Citadel-Gate-open-v1.0, Skull-Citadel-Gate-smlprinter-top-v1.0, Skull-Citadel-Tower-bottom-v1.0, Skull-Citadel-Tower-floor-v1.0, Skull-Citadel-Tower-standalone-floor-v1.0.
8th August 2017 (version 1.1) The base has been flattened on the Skull-Citadel-Tower-standalone-ring-v12.
2nd October 2017 (version 1.2) Contains WD-Round-5.2-base and WD-Round-5.2-base-penta.

Notes for Citadel Grimskull:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
File Type	STL files in ZIP folder
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Dimensions	Dimensions and weights are available in the image gallery
Supports	requires supports for resin printing, FDM Prints without support
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Michael (verified owner) – October 13, 2016

It looks like the tower comes in two corner varieties: a 90 degree corner and a 60 degree corner.

Is it possible to add a “T” intersection tower, and a 180 degree tower to interrupt straight walls?
- Matthew Barker – October 13, 2016
  
  Yes, We can look at this in the next round of upgrades. I’ll add it to the list.
Jeff Neely – October 16, 2016

If you are open to adding those variants, then a version with a single connector would also be good — for anchoring the end of a wall.
- Matthew Barker – October 18, 2016
  
  Yes, I would like to do some more variants. We are drawing up some new ideas now.
Massimo brunelli (verified owner) – October 17, 2016

HI, i buy the set today, my printer have 0.09 and 0.14 res, is better 0.14?in future is possible some ruined section for this set? thanks!
- Matthew Barker – October 18, 2016
  
  Yes we could do an upgrade to it in a future Kickstarter
Tom Aukner (verified owner) – December 3, 2016

This set is very nice and the details on the walls prints well on my normal .18 resolution..cudos!

I would like second the wish for T, I and single junction tower/wall connectors.
Also I would very much like to see ruined/ toppled versions of this
- Matthew Barker – December 4, 2016
  
  Hi, we can make a T junction for this, no problem. It’s on the list 🙂
hakan (verified owner) – October 1, 2017

What tiles were used to create the terrain below the tower in the painted picture? I could not find anything similiar in the shop.
- Matt Barker (verified owner) – October 2, 2017
  
  The round base from the turret cupola was added to the model in the painting. The file pack has now been updated to include it. Please re-download

Add a question

You must be logged in to post a question.

Citadel Grimskull

Description

Additional information

Comments

Featured Articles

We use cookies