$9.95
The Dwarven Risers are primarily used for multi-storey set-ups and large columns. This set is designed to be used with Dwarven Floors and Rampage Heavy Wall sets and is compatible with all of our OpenLOCK products.
Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Vast structures make up the dwarven fortresses and mines, supported by large slabs of rock and finished with ornate dwarven finishings.
Notes for Dwarven Risers:
| Recommended Printer | FDM or resin printer |
|---|---|
| Terrain Tinker | Available |
| Infill | 100% for resin printing, 10% |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
In this article, we’ll cover three different OpenLOCK doors and how to build them. The three types are the sliding door, the hinged door, and the hinged door with the stone cap. Each has its own advantages, but all go together easily. Sliding Door These kinds of OpenLOCK doors are the easiest; all you need… Read more
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
In this article, we’ll show you how we go about removing the small supports that are printed on all OpenLOCK model ports. These small supports are printed to support the overhangs in the OpenLOCK port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. For this, we recommend using… Read more
You must be logged in to post a question.
Comments
There are no questions yet.