$7.95
The Battering Ram is designed to be printed in two parts and should be printed at .1.
The bottom requires supports touching build-plate switched on.
This model is part of our Machine range.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Only the strongest of doors and walls can withstand the pounding of a solid battering ram.
Notes for Battering Ram:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Supports | requires supports for resin printing, Requires supports on some files |
| Layer Height | 0.05 high quality on resin printers, .1 high quality |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
You must be logged in to post a question.
Robert Haddon (verified owner) –
How is it possible to print the bottom piece without supports? The caps over the ends of the ram extend down into open space.
Matt Barker –
The battering ram bottom needs supports touching buildplate switched on